• taking paint off of metal models


    Hi this article is for taking the paint off the metal models so you could begin a new paint job.I got this tip from a friend and have tested it several times. Materials Plastic cup ( I use a cup from pizza hut)Pine sol ( pine cleaner works too)MiniOld tooth brushSteps1. Take the base and any plastic off the mini and place it in the cup2. Pour the pinesol in till it covers the mini3. Place out side,4. Wait at least 2 days.5. Take out the mini the paint should looked smugded6. Now if you dont really care too much about your mini use a hi powered hose and blast the paint away, if you do care then put it under running water (sink) and use the tooth brush to rub the paint off.7. Leave to dry. and you're done.Notes:Multiple minis can be put in the pine sol at the same timeI am not sure but I was told the plastic melts in the pine solIf some paint wont come off repeat steps 2-7 again.
    THIS IS TOXIC!!!!! DO NOT DRINK OR SNIFF THATS WHY YOU LEAVE IT OUTSIDE!!!!! THANK YOU FOR REMINIDING ME S.DEVARE
    I have just been told that Simple Green works too and its non toxic however it is more expensive.
    Thank you Night life

    I hope this helps ThanksMr.Bman
  •  Articles order

    sort by Set Ascending

    Recent Articles

    gunrunr-143102

    How to make a cheap yet effective spray booth.

    Hello everyone. I'm here to show you how to make a nice spray booth for airbrushing. I took what I learned from watching different videos and came up with what worked best for me. After collecting all the items, the job of putting everything together actually only took me about 30 minutes. Below is the list of items you will need.

    1.) Plastic storage tub $6-$10 (Mine was free because I found it in the garage).
    2.) Ventilation fan $18
    3.) Air... read more
    gunrunr 04-07-2017, 07:00 PM

Privacy Policy  |   Terms and Conditions  |   Contact Us  |   The Legion


Copyright © 2001-2016 CMON Inc.

-->