• Weathering Tank Treads With Pigments

    This tutorial will show you how to create realistic tank tread weathering. Not surprisingly I'm using pigments from Secret Weapon Miniatures, but the same effect can be achieved with any brand -- although the colours may vary slightly.

    In this example I am using:

    Dark Earth
    Terracotta Earth
    Clay Brown
    Metallic Iron (not shown)



    Using more than one colour will help create a richer, more realistic weathering. This principle holds true for most applications but especially for rust, dirt, dust and mud.

    Starting with a black base coat allows us to take advantage of existing shadows as we apply the pigments. Using an old brush I add Dark Earth over most of the tank tread.



    Next I apply Terracotta Earth. Going from dark to light puts the lighter colours on the top of the tread and will create the look of dried, old dirt on our tank. If you want to go with a fresher look then go from light to dark so that the darker colour, more representative of fresh mud, is on the top.

    Apply the colour unevenly and in a splotchy pattern. This will keep the weathering from looking too uniform and increase the realism.



    Next I apply Clay Brown in dense, uneven sections. This creates the look of dry mud or sandy dirt. You can already see the weathering pigments bringing out the detail in the tank tread. This was done without the addition of any thinners or additives using only an old brush and the pigments, straight out of the bottle.




    Last, but certainly not least, I'm going to dip my fingertip into a bottle of the Metallic Iron weathering pigment and rub it gently over the top of the tank tread. In the top image you can see the tread before the Metallic Iron weathering pigment goes on and in the bottom two the difference it makes. This has the effect of creating realistic rubbed metal tank treads without the risk of overdoing it with drybrushing.



    By modifying the density of your weathering pigments, the colours and the order of application, you can create realistic weathering on your miniatures in models to match any environment that you can imagine.

    Pigments should typically be the last thing that you apply to your model. If you're going to game with the model I recommend that you finish everything but the pigments, seal the model with a gloss and/or matte varnish, then apply your pigments followed by a very (VERY!) light layer of matte sealer to hold the pigments in place. Keep the sealer roughly 12" away from the model and do a couple of light, quick passes. Remember to shake the sealer thoroughly and keep it at the recommended temperature on the can to avoid frosting effects and, again, apply it only lightly. The goal is to keep the pigments in place - not to protect the model.
    I spent less than five minutes weathering this section of tank tread and it's gritty, dirty and realistic. However it's never too late to go back and add more pigment. I could go in now and add more earth tones or, for a desert environment, add some Burning Sand weathering pigment to bring out more of the yellow tones. Ash Grey would give me a dusty, urban look.*Weathering pigments are an easy way to create realistic weathering on your models and miniatures. Although I'm biased towards my own Secret Weapon brand pigments you can get good quality pigments from MIG, Vallejo and Doc O'Brien as well.

    Pastels are made from lower quality pigments and contain a wax additive to hold them together and will *NOT* achieve the same quality of results. Whichever brand of pigments you pick up, the bottle will last you a very, very long time and is worth the investment.

    -- misterjustin
    Comments 2 Comments
    1. jp762's Avatar
      jp762 -
      Yeah , you made my mind up for me too. No more painting weathering. That looks great and will do the job for my IG and WW2 stuff. Great post.
    1. TheLost's Avatar
      TheLost -
      awesome job, but did you use the secret weapons miniatures pigment binder after applying the pigment?
  •  Articles order

    sort by Set Ascending

    Recent Articles

    gunrunr-143102

    How to make a cheap yet effective spray booth.

    Hello everyone. I'm here to show you how to make a nice spray booth for airbrushing. I took what I learned from watching different videos and came up with what worked best for me. After collecting all the items, the job of putting everything together actually only took me about 30 minutes. Below is the list of items you will need.

    1.) Plastic storage tub $6-$10 (Mine was free because I found it in the garage).
    2.) Ventilation fan $18
    3.) Air... read more
    gunrunr 04-07-2017, 07:00 PM

Privacy Policy  |   Terms and Conditions  |   Contact Us  |   The Legion


Copyright © 2001-2016 CMON Inc.

-->