• emopainterguy

    by Published on 04-21-2008 09:40 AM  Number of Views: 50496 

    Alrighty now. Here we go. First article I've made for any site, hopefully you all find it useful in some way so please please please comment on it once you finish going through it.
    Here's the concept. The undead march at night. Not in the morning. Not at noon. Not at tea time. At night. At least that's my opinion and I'm sticking to it. So my goal was to create a paintjob that really reflected this idea.  At night the cells in your eyes responsible for colour vision (cones) just don't function, so you're left with pretty much black and white vision (rods), but that's kind of boring, so instead I tried to stay away from bright colours, and stuck to neutral and desaturated tones as much as I could.

    This guide is broken down into sections and goes layer by layer through the process. I mostly used layering and washing/glazing through out the entire project. If you don't know how to do that, then please look them up in the articles section as I won't be explaining them as I go. I suppose this is enough talking so I suppose I'll get on with it.
    >>


    Page 1: Concept and Painting the Bones
    Page 2: Painting the Leather Straps and Cloth
    Page 3: Painting the Metals
    Page 4: Painting the Shield
    Page 5: Painting the Base
    Page 6: Finished

    Please assemble and prime your model before you begin, I've used black primer and I can't guarantee the same results if you use a different colour. I've used citadel paints, including some foundation paints, so again if you are using different paints use a conversion table or something like that or just your best guess.>>


    I. Bones>>


    Step 1: Basecoat the bones of the skeleton in a 1:1 mixture of Adeptus Battlegrey and Dheneb Stone (both foundation paints). Try to get a nice solid colour to start with. I find if you've watered the paint down two layers is probably enough. You don't need to be too neat, just make sure you get all the bones.
    >>


    Step 2: Apply a wash made of a 1:1:1 mixture of Chaos Black, Codex Grey, and Graveyard Earth over the entire model. This wash mixture will get used throughout the entire process so if you plan on doing this a lot you may want to mix up a pot of it, or just find a way to keep it from drying out.


    Step 3: Once the wash is dry mix up a 1:1 mixture of Codex Grey and Graveyard Earth and layer it onto the bones, being careful to highlight only the upper surfaces of the bones, and leaving the recesses and lower surfaces darker. Apply a bit more of the mix to the back of the model, as for this one I've chosen the light to be coming from above and behind, you can use any direction you want, just keep it constant through your painting.
    >>


    Step 4: Apply another wash made of a 1:1:1 mixture of Chaos Black, Codex Grey, and Ultramarines Blue over the bones. Just apply it fairly thin and let it get into the recesses of the bones, and do its own thing. If you apply it too thick you'll tone down your last high light a lot so try not to be too liberal with it.
    >>


    Step 5: When the wash is dry apply a 1:1 mixture of Graveyard Earth and Ice Blue to the upper surfaces and much like in Step 3, but just try to make the highlights thinner, and leave more dark showing. Again add a bit more highlighting to the back, or whichever direction you have chosen for your light source.
    >>


    Step 6: Apply a 1:1:1 mixture of Graveyard Earth, Ice Blue, and Space Wolves Grey to the upper most surfaces like before. This time don't highlight all the same places as before, but try to only highlight where the moonlight would be hitting, this may take a while to figure out, but just go with what feels right and it'll turn out fine.
    >>


    Step 7: Now finally apply a highlight of Space Wolves Grey to only the top surfaces of the bones, and as before only do the bones that would be most lit by the moon.

    *I have also at this stage cleaned up the model by painting Chaos Black over any areas that got paint on them that weren't bone.
    >>


    Ok so we're done the bones, let's move on to the leather straps and cloth.


    [pagebreak]


    II. Straps/Leather


    Step 1: Basecoat all the straps and leather bits with a 1:1 mixture of Adeptus Battlegrey and Khemri Brown (both foundation paints). Again aim for a nice solid colour, but now remember to be careful so you don't have to repaint any of the bone.
    >>


    Step 2: Apply a wash made of 1:1:1 Chaos Black, Codex Grey, and Graveyard Earth. Try not to get it on the bones too much, but remember the same wash was used early on in the bones, so if you get it where the bones and leather meet it shouldn't really change the colours too much.
    >>


    Step 3: Ok, I'm sorry. I missed taking this picture, but it's pretty simple step so it shouldn't affect you too much. Apply a highlight of a 1:1 mix of Codex Grey and Graveyard Earth. Try to only highlight the tops and upper portions to leave some shading from the other steps. >>


    Step 4: Apply a wash made of a mix of 1:1:1 Chaos Black, Codex Grey and Ultramarines Blue. Apply it more or less like Step 2, just make sure it's not too thick that it tones down the highlights from Step 3 too much.
    >>


    Step 5: Apply a final highlight of 1:1:1 Codex Grey, Space Wolves Grey, and Bleached Bone. Apply this to only the very top of the straps much like the last highlight for the bones.
    >>


    III. Cloth


    Step 1: Apply a basecoat of Liche Purple. Like always a solid colour is the goal, do as many layers as needed.
    >>


    Step 2: Apply a pretty liberal wash of 1:1:1 Chaos Black, Codex Grey, and Graveyard Earth. Try not to be too messy at this stage. You might have to do a couple separate washes for this step, just make sure they are dry before you apply the second coat of it.
    >>


    Step 3: Apply a highlight of 1:1 Liche Purple and Scab Red. Try to leave some of the darker dirtier purple showing, but it's not vital at this stage to leave a lot.
    >>


    Step 4: Do a highlight of 1:1:1 Liche Purple, Scab Red and Ice Blue. The colour transition is a little harsh so try not to apply it too heavily. Do your best to leave the reddy purple showing in some places.
    >>


    Step 5: Apply a final highlight of 1:1 Liche Purple and Space Wolves Grey. Put this only on the edges of the cloth, it should be pretty bright, and you don't want to make it too bright overall.
    >>


    Step 6: Do a careful wash of 1:1 Chaos Black and Liche Purple only in the recesses and lower surfaces of the cloth. Try not to get it on the final highlights if possible. You really only want to clean up the shadows and where the purples meet other colours.
    >>


    Just a little bit more and we're done this part, so let's move on to the metals.


    [pagebreak]
    >>


    IV. Metals


    *Ok, I'm going to apologize in advance for these pictures... They were the best I could do under the circumstances. Try to focus on the helmet or the random plates over the sword. When I get to the shield there are better pictures of the process. >>


    Step 1: Apply a basecoat of Boltgun Metal to the metal bits. Again be careful and aim for a solid colour.
    >>


    Step 2: Apply a wash of 1:1:1 Chaos Black, Codex Grey, and Graveyard earth over the metals. Cover them completely, but don't let it pool too much. Two successive washes may be needed.
    >>

    ...
  •  Articles order

    sort by Set Ascending

    Recent Articles

    gunrunr-143102

    How to make a cheap yet effective spray booth.

    Hello everyone. I'm here to show you how to make a nice spray booth for airbrushing. I took what I learned from watching different videos and came up with what worked best for me. After collecting all the items, the job of putting everything together actually only took me about 30 minutes. Below is the list of items you will need.

    1.) Plastic storage tub $6-$10 (Mine was free because I found it in the garage).
    2.) Ventilation fan $18
    3.) Air... read more
    gunrunr 04-07-2017, 07:00 PM

Privacy Policy  |   Terms and Conditions  |   Contact Us  |   The Legion


Copyright © 2001-2018 CMON Inc.

-->