Sukigod's All-In-One Painting Log - Page 13
Page 13 of 24 FirstFirst ... 3111213141523 ... LastLast
Results 241 to 260 of 479

Thread: Sukigod's All-In-One Painting Log

  1. #241

    Default

    Feeling better (been sick the last week) so decided to break out the brushes today and slap some paint. Did the robes on the two slavers - one in red, the other in a dirty tan/off white. I'll be painting the leather hoods in appropriately contrasting colors.



    Progress will be slow(er) as I get the new hobby room sorted out and things hammered down for the Waaagh!Fest Pub Tournament coming up in July. I know, it seems like it's a long ways away but there's a lot to do I don't want to wait til the last minute for anything dealing with this tournament. The trophies are in and only need them to be etched, now on to some prizes and getting the print stuff (rules, posters, etc.) generated for more publicity.

    Later!
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  2. #242

    Default

    Just to tease the living crap outta ya all. I've started work on the Blasta Bommer tonight. I've done my initial digging through my bitz boxes and did some preliminary studying of the Forgeworld Aeronautica models and re-combed through what can be found of Pox's insane build. I've sketched out the general scale and I'm not making it nearly as big as Pox's. His was nearly two feet long, mine will be a more modest 16"-18" long with a wingspan somewhere around 20"-22". To prove I'm not kidding, here's the initial stage...



    I'll be making mine a combination of the features I like amongst all the options available on Forgeworld. I like the banded engines much like pox did but I like the double stacked tail fin with twin engines. I'll be using a similar design for the nose that pox did as well. I won't be modeling each side door gunner though for a couple reasons. One, you don't see them that much as pox found out - and I don't have enough of the BW gunners and really don't feel like modeling all of them. Easier to make portholes with big shootas sticking out.

    I'm actually hoping to be fairly consistent with the build on this and not let long gaps in updates. I'll do some more preliminary scale drawings to shore up more details so I know what to build into hte main structure and I need to find a small tabletop tripod and make sure this thing is supportable.

    Later!
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  3. #243

    Default

    Ohhh I am so watching this!!!
    Can't wait to seehow it starts.

    Tee
    “We do not want to be part of the fashionable crowd. We prefer to be on the edge.”
    Takasi Uno

  4. #244

    Default

    It starts like this Tee!

    Took some time during lunch to sketch out and do a scale drawing of the bommer today.



    I've blocked out the basics - enough so I can confidently start transferring it to some full size graphed paper and making patterns for the interior ribbing. I went back through both of pox's threads on this beasts and have made a few technical decisions ahead of time. I've ordered a tabletop tripod (great idea pox) and I plan on making the wings removable for transport/storage. I have a plan...

    Off to the hardware store for pvc pipe!

    Later!
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  5. #245

    Default

    This is going to be awesome.
    I think I might have to get back into Orks because of this.

    Tee
    “We do not want to be part of the fashionable crowd. We prefer to be on the edge.”
    Takasi Uno

  6. #246

    Default

    Looks like you may wish to make the tail removable as well. PVC for the body or are you planing P-card over ribs?
    "Yes, yes, yes. Woman are in awe of his manhood and men swoon in his wake. Truly he is a legend in his own mind."

  7. #247

    Default

    Mud Duck: Yeah, I'm going with pcard over ribs. I will be running 1/4 wood dowels though it though for support.

    Scaled up the bommer plans today. This is a full size drawing/outline.



    I've included a Barry shot using a few other models for scale. Skullhammer, standard battlewagon, trukk and a few boyz.



    And I went through my bitz boxes to see what I could use so I wouldn't have to scratch build. I got lucky by having enough/more engine parts so this one will have a little more power! Yeah!



    Now to do a front scale for making templates. Woohoo!
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  8. #248

    Default

    So awesome.

    Tee
    “We do not want to be part of the fashionable crowd. We prefer to be on the edge.”
    Takasi Uno

  9. #249

    Default

    Spent some time today on the bommer. Got the interior ribbing done. Took a long time and was tedious work to make sure everything went together right the first time. Here are the templates/parts initially cut put.



    The ribs were made from the same templatw and I wasn't too worried about them being absolutely, perfectly, exactly the same...



    I then sliced a wedge shape out of the middle. I'm not detailing the interior so I wasn't interested in leaving a large inside space and I angled it to be wider at the top to make room for recessing the pilot and adding the top turret gunner. The piece on top of the left and right rib stacks will be glued on the front edge of the floor/top structure to add some rigidity. It will also be where the nose gets glued onto the fuselage of the plane. I'm leaving it off until I can add the superstructure for the wings and tripod mount - easier access.



    More to come!
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  10. #250

    Default

    I then used a Dremel to cut slots in the top and bottom supports The depth of the cut determined the angle so cutting them all the same made it easy to align all the rib sections when I was ready. Here's the glued together interior frame from the front...



    The rear...



    The underside.



    And a Barry shot.



    I need to change out the crappy CFL bulb that came with my new angle lamp - color correcting these pics absolutely suck! Taking the Barry shot made me realize how big this thing really is - it's gonna be pretty huge! Oh well.

    Later!
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  11. #251

    Default

    YEESSS! I'll be eagerly watching this as well! Brilliant!

  12. #252

    Default

    Stopped off at the hardware store at lunch today and picked up some pvc and epoxy putty. I picked up 1x4-way connector, 1xT connector, a male/female threaded connector, a 2' piece of pvc pipe (all in 1.2" dia.) and two tubes of plumbers epoxy putty for around $12. Nice and cheap!

    I get home and lay the pieces out for test fitting…



    GASP! I had always intended to us 1/2 pvc as my main internal structure so I based my ribbing spacing at 3/4". Way more than enough room, right? Uhhh… As you can see, the connectors are wider than 3/4". Me being the non-genius that I am, didn't take into account that the connectors (which have to fit inside the ribbing too) would be much wider than the 1/2 pipes them selves since they fit OVER/OUTSIDE the actual 1/2' tubing. If I ever do a second blasta boomer, I know to base my spacers on the dimensions of the CONNECTORS! not the pvc pipe I'm using.

    This will mean i have to cut out one spacer to let me get the connectors inside - the angles I cut them at hinders this a swell so the Dremel gets a good workout and cutting away some of the interior ribbing to get everything in there - more of this can be seen in the last photo of the post.

    Here's rough placement (outside the ribbing) to see where I plan on placing the connector points.



    Now, the placement of both the 4-way and the T connector are completely guesswork. I have no idea of how heavy this thing will be in the end, where the actual center of balance will be so I I'm doing a "best guess/cross my fingers" placement. I know pox's build had the center of the wing/fuselage cross point as the center of balance where the tripod connected to the plane. I've decided to change that a little - we'll see if it bites my in the ass later. Because of the estimate weight of the tail I don't think this would work in my case.

    If things turn out to be way off balance I'm assuming it'll be in favor of the nose. The way I'm building this (nose to tail), I'll be able to easily hide extra weight in the tail section as I fill it in to counter that. Again, I'm hoping that's how it'll work.

    Here's the putty I purchased. I couldn't find the brand pox suggested but I'm pretty sure this is reasonably close - and it's really cheap. It's around $5-$6 a tube. You can see some of the carnage I had to inflict on the internals to get the connectors in there..



    Here's the "backbone" showing the final placement. There will be a short piece coming out of the front side that will be glued to the nose plate and a longer piece extending through the tail to give maximum support across the entire length of the plane. I've decided to leave the side wing connectors open and have a short piece of pvc coming out of the wing to make them removable. PVC fits together pretty snuggly so I'm not to worried about connection strength - the wings won't be that heavy.



    I'm hoping to have the rest of the "backbone" finished and puttied down by the end of tonight and maybe started on the main central structure of the wings sometime this weekend.

    A note on the putty… I read the instructions inside the tube and they mentioned something about wearing rubber gloves of some sort. I kinda blew this off as being "over protective in this litigious society". Nope, for two reasons. One, not only does it get sticky when you're kneading it, the stuff will get embedded into the pores of your skin and be hell to get off. Remember, this stuff sets up like concrete steel - imagine that in your pores. Second, it gets hot! I was surprised by how much heat is generated by the chemical process while mixing. This does make it a little trick when trying to apply this in tight spaces (as I did) but the latex/rubber gloves were worth it in the long run.

    (yes, I spent 15 minutes trying to remove the compound from my skin after the first application).

    Later!
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  13. #253

    Default

    Whoa HUGE!
    Very admirable since I would never even dare to face a project like that.
    Quote Originally Posted by uberdark View Post
    i prefer to get two miniatures and rub them around on my gaming bobos.
    Totally going for #1 -->

  14. #254

    Default

    Thanks A Luna!

    My tripod came in yesterday and got the chance to get it ready late last night. Here now, in excruciating. boring detail, is how I modified the tripod for my bommer.

    Here's the original tripod, maybe $20 tops online (Amazon.com I think). It's rated to hold up to 2 pounds but after getting it in the mail and wrenching around with it for a bit I think that is determined by the swiveling head and not the actual tripod support legs themselves.

    The stand itself is pretty sturdy. When I was finished I "stress" tested the hold by putting the plane as it is so far on it for normal use, then stacked my two skullhammers on top (as best I could) with different weight distributions and not only did the connection hold fine, the balance stayed pretty stable as well. I'm not worried about this thing falling over one bit.



    I disassembled the multi-axis head down to it's component parts. I wanted to see if I could keep the swiveling aspect of the pan head since this will give me more placement options on the table with the skinny legs, then simply turn the plane in the direction I need. The part I'm most interested in is the center pivot/swivel joint. I need this (the black part) to fit inside the threaded pvc connector.



    Ten minutes with the bench grinder and viola! The head part fits snugly inside the pvc connector. I drilled a matching hole in the pvc connector so I could pass the lock down screw through it. Because of the way the lock screw was designed, I had to cut the edges of that down so the threads could meet the original swivel head part inside the pvc connector.



    I applied a pit of plumbers putty inside the pvc connector and made sure I spread a thin coating around the inside barrel portion of the connector, then shoved the pan head part into it, centered it on the lock screw hole and added some more putty around the bottom for good measure. After curing I put the whole thing together for testing.



    As I mentioned earlier, My biggest concern was "is this gonna hold? Did I cheap out too much and not get a sturdy enough tripod?" My fears were quickly put to rest. Because I changed the way the tripod connection system worked, the listed weight limit for the pod was pretty much nullified. I put some pretty good pressure on that thing, to point where I was going to break something, and it held just fine.

    Here's scale shot of the finished support system with a little Barry boy for fun.



    I've started cutting parts for the main engines (as seen in the last pic) and will be starting work on them today. I might switch to the nose for some variety - besides, I'm excited to see all the weapons I can cram into the Deff Arsenal!

    Later!
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  15. #255

    Default

    It's a Martian Tri-pod! Run!
    "Yes, yes, yes. Woman are in awe of his manhood and men swoon in his wake. Truly he is a legend in his own mind."

  16. #256

    Default

    Spent 2 hours last night making the primary engine intakes. Fiddly work but it' s got to be done! Here's how I did it.

    There's a couple of different ways to do turbine blades. Some of them include math and geometry. Mine include neither! I completely guessed (as any good mek does) on the number of blades and how to make them even. I choose 12 fan blades.

    I started by cutting out 5 similar sized disks. Two for behind the fan blades to glue to and three for cutting the fan blades from. I didn't do any magic measuring of fancy stuff to come up with cutting 8 pie shapes from each. I just wanted to make sure they overlapped a bit and I figured if I squished four more slices into a circle originally dissected by 8, there should be some overlap. If you understood that well enough, here's your degree!



    I cut the three disks into pie shapes and then cut the tips of each off. Things get really tight at the center of the turbine if you don't do this. Trying to stack 12 layers of plastic in the middle of the circle will only cause problems so away they go. We'll be covering this part with bullety shaped part anyway.



    I made a time-wasting mistake with my first turbine blade by laying the first blade down, the the next - and on and on - until I reached the first one and tried to slide the last blade under the first one. Didn't work. It was nearly impossible to align the blades evenly this way and the glue had a tendency to set more than I would have liked by the time I got all the way around, causing sticky problems. Then i hit on this idea…



    1. Draw out the radians so I know where to line up the fan blades.
    2. Glue all the fan blades in place with them all standing up. This was much quicker as I didn't need to worry about jostling the other blades and it was easier to see the markings. (the original wreck of a turbine is upper right)
    3. I used the back end of my exacto knife to push the blades down on one another a little at a time. Since the glue was still soft-ish, but still sticky enough to keep t from sliding, the fans kinda hinged down against each other. This kept the blades in place and they automatically went down to the farthest angle possible n their own without any measuring.
    4. Leaving me with this. These are both, finished turbines. Not perfect (I've seen much better) but will work for me.



    Here's the turbines now glued in place. I just hotglued them in place, they didn't need anything more complicated. I'll be making a rounded edge using putty just like pox did in his build. No need to remake the wheel. Depending on how well this masks the gap between the fan blades and the housing wall, I might try to find a gubbin that will ring the housing to cover it a little - we'll see what the bitz box has.

    Later!
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  17. #257

    Default

    Brilliant!

    Where/what are the cones from?
    "Yes, yes, yes. Woman are in awe of his manhood and men swoon in his wake. Truly he is a legend in his own mind."

  18. #258

    Default

    I dig it. The PVC backbone is a great idea, should make the whole thing very sturdy in the end. The tripod is brilliant too. I may have to borrow that for a project I've got in mind. Very ambitious to make your own turbines, and brilliant to collapse them after gluing. They're really looking good so far.

  19. #259

    Default

    Thanks guys!

    Mud Duck: The cones are the original booster rocket tips from the space shuttle model I looted as pulsa rokkits.

    khavor: I have a tendency to overbuild my stuff like that. You never when some little blighter might pick it up... The tripod isn't my idea though, pox did this in his original build and it's his genius. I just kept the panning ability. As for the turbines, I think the more I look at it, I was most likely inspired by the folding Japanese coin purses. I used to do a lot of origami and this must have been cooking in the back of my brain for a while. Goes to show, you never know where inspiration might come from.
    Quote Originally Posted by uberdark View Post
    your my boogaboo. thanks suki.
    Bigshoota.com

    Granite City Waaagh! Fest!
    The Big Mek Manual

    bullets left and I'm comin' for ya!

  20. #260
    Senior Member delta 408's Avatar
    Join Date
    Nov 2005
    Location
    Cebu City, Philippines
    Posts
    402
    Rep Power
    14

    Default

    Looking good there Sukigod. Love the idea for the turbines.

    Cheers!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Privacy Policy  |   Terms and Conditions  |   Contact Us  |   The Legion


Copyright © 2001-2018 CMON Inc.

-->