Sculpting Cloaks
Results 1 to 13 of 13

Thread: Sculpting Cloaks

  1. #1

    Default Sculpting Cloaks

    Hi all,

    I'm in the process of trying to sculpt a fur cloak from scratch and struggling a little with the pelt base to get it looking right. I've rolled out my green stuff, got it as smooth and flat as I can, but the whole thing is, well, floppy and lack-luster. I know it's not cured yet, but I just don't think this is quite how cloaks are normally done, as soon as I manipulate it so I have a fold and it's flowing in the direction I want, I'm finding that it's just relaxing with gravity. I was hoping to have put some small rips and such like, but not a chance without messing everything up.

    My initial thought is that the GS is just too flexible and I need something that sets a little bit more rigid - any suggestions? I think using a GS/milliput mix could be an idea, but not positive. I do have a few other putties lurking but wondered if anybody had any suggestions before I waste loads of time and putty experimenting.

    pete

  2. #2
    Brushlicker Bloodhowl's Avatar
    Join Date
    Nov 2010
    Location
    Richmond, Texas
    Posts
    1,599
    Blog Entries
    5
    Rep Power
    12

    Default

    How long are you letting it cure before trying to work it? Drape it over the model in the rough shape you want, then let it sit for 20-30 mins and then work it into it's final shape. It should be cured enough at that point to hold it's shape, but still be flexible enough to allow you to adjust it.
    Last edited by Bloodhowl; 05-19-2012 at 07:19 PM.

    Check out more of my wife's photography at: http://thereasagwinn.com


    Why choose Space Wolves over other chapters?
    ‘They are desperate, and as savage as beasts.’
    Magnus lost his smile.
    ‘I no longer think of them as animals, Ahmuz, though I once did. I now think of them as the purest of us all. Incorruptible. Single-minded. The perfection of my father’s vision.’
    Excerpt from Battle of the Fang



  3. #3
    Superfreak!!! Dragonsreach's Avatar
    Join Date
    Apr 2002
    Location
    Bolton, Lancs, UK (A Geordie in Exile)
    Posts
    17,345
    Rep Power
    39

    Default

    As bloodhowl says allow it to cure for 20 minutes or so before trying to work it.

    Alternately fold a section of baking foil into the shape you want the GS to follow on the model.
    Take off the model, support the underside with blutack, lightly wipe the foil with vaseline and work the GS on the tinfoil.
    When fully cured remove from tinfoil and Voila.
    I believe in Karma, what you give, is what you get returned. Affirmation; Savage Garden
    Oh look my IQ results came in:-
    , and proud of it.

  4. #4

    Default

    What they said, try searching for sculpting flags, it's more or less the same technique
    http://img.photobucket.com/albums/v433/freak-in-a-cage/freakinacage-1.jpg

  5. #5

    Default

    Cheers all. I left it a good 30 minutes after I flattened it before I tried to do anything and then gave it another 30 before I got it almost there. Overnight it's completely cured - it's still slightly flexible. I might try again using some of the tips (thanks Mike) and possibly see if the magi-scultp I've got upstairs has a different constitution

  6. #6

    Default

    It might also be useful to put in a bit more blue instead of the yellow part Makes it harder and it's cured a bit faster
    My painting blog: The Way of the Painter

  7. #7

    Default

    Sod that, if you have magic sculp, use that, much easier. Maybe mix a tiny amount of gs with it though

    and use talc to stop it from sticking
    http://img.photobucket.com/albums/v433/freak-in-a-cage/freakinacage-1.jpg

  8. #8

    Default

    What's the difference between GS and Magic Sculp?
    My painting blog: The Way of the Painter

  9. #9

    Default

    GS is more rubbery...has more memory. Both while working with it and after it has cured. So it tends to be used for organics, things with curves, etc.

    MS is a little less influenced by memory or what happens to other parts of itself. Makes it easier to do things like weapons, electronics, etc, stuff with sharp defined angles. Similar to ProCreate, ApoxieSculpt. It's kind of similar to a mix of GS and Millput.

  10. #10

    Default

    Quote Originally Posted by freakinacage View Post
    Sod that, if you have magic sculp, use that, much easier. Maybe mix a tiny amount of gs with it though

    and use talc to stop it from sticking
    I've actually got a whole range of different putties - GS, milliput, MS, BS and procreate, that I bought in a fit of enthusiasm a while back. I've just never got round to using anything anything other than GS and milliput (and a mixture of the two). I was actually using baby oil to stop the GW sticking, never thought about talc... Not sure what time I'm going to have this week but will try and find a bit of time and have another bash

  11. #11

    Default

    Out of choice I will only ever use magic sculp and gs. ms heavy for blending, sharp edges and rigid stuff, gs heavy for organics
    http://img.photobucket.com/albums/v433/freak-in-a-cage/freakinacage-1.jpg

  12. #12

    Default

    for flowing things like cloaks and cloth I use a mix of GS and A+B (UK one)
    My Gallery <IMG SRC=http://www.coolminiornot.com/rank.php?name=mickc22> Paragon Studios

  13. #13

    Default

    Not sure if this will help, but it's worth a look I think...

    http://masteroftheforge.com/2012/01/...omegon-part-3/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Privacy Policy  |   Terms and Conditions  |   Contact Us  |   The Legion


Copyright © 2001-2018 CMON Inc.

-->