Page 3 of 3 FirstFirst 123
Results 41 to 47 of 47

Thread: ADE goes giant mad...

  1. #41

    Default

    Loving the work you have done on these minis. That hippo is looking great.

  2. #42

    Default

    Starting to get a bit of shape into the Reaper Hill Giant.
    Attached Images Attached Images   

  3. #43

    Default

    Started a couple more projects this week,a Dungeons and Dragons Frost Giant and a Harry Potter Mountain Troll. The Troll stands 8 inches when complete, it was broken down into it's separate components and then rebuilt using Araldite. The cavities were filled with Ronseal wood filler which sets like concrete in a few minutes,any over spill on the joints was sanded flat with wet and dry paper.The join line around the torso and the mould line around the arms were worked with a small diamond file and scalpel then burnished with steel wool to soften the effect and to blend in with the existing skin texture.The joints were drilled out with a Dremel to get a nice snug fit.
    Attached Images Attached Images         

  4. #44

    Default

    Two sub assemblies finished just needing a bit of filling in a couple of places,the legs were glued and screwed on and then this is glued and screwed to the torso.
    Attached Images Attached Images     

  5. #45

    Default

    Picked up a wooden base from Hobbycraft for £2 which was filled,sanded and then the edge was burnished with wire wool to get a super smooth finish.The Troll was glued and screwed to this.The hands were a nightmare to prep as the mould line went all between the fingers.The club is just a piece of old wood which was worked with a Dremel to give a little more character, this was then fitted into the hand by forcing the fingers open,once in place the hand was put in boiling water for 3 minutes and clamped over night to give a nice tight grip around the club.Filling work was then completed on the main assembly leaving just the hands and head to attach then blend in.I've include a near finished pic but the hands and head are just pressed on at this stage.
    Attached Images Attached Images    

  6. #46

    Default

    With the exception of the filling and completion of groundwork the Troll is now finished.The slate on the base has started to be blended in with Magic sculpt also there are some extra creatures on the base, a frog,rat and goblin.The hand was drilled in two places and brass rod glued in to hold the club in place then super glue was run all around the inside .
    Attached Images Attached Images    

  7. #47

    Default

    Troll construction now finished.Head and neck blended and textured with Magic sculpt then the whole figure painted with liquid green stuff to unify the surface on all the areas that had been worked on .The base was covered with PVA then sprinkled with five different sizes of small stones,gravel and sand.Once this was banged to knock off the excess a runny mix of PVA,water and a few drops of washing up liquid(to break surface tension) was applied with a pipette to firmly hold everything in place.
    Attached Images Attached Images     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Privacy Policy  |   Terms and Conditions  |   Contact Us  |   The Legion


Copyright © 2001-2018 CMON Inc.

-->