CoolMiniOrNot Forums - Miniatures step by step
  • Miniatures step by step RSS Feed

    by Published on 03-15-2021 01:20 PM
    Article Preview

    Welcome to Painting 15mm Imperial Romans tutorial. Here I will present to you a Step-by-step of an easy and fast painting process for 15mm scale Imperial Romans by Grenzer Games as can be seen in this gallery.

    Before we start, some notes:

    * You can visit original article at
    * This tutorial does not require airbrush.
    * You can use any paints, not just the ones I recommend. You can use this chart to compare paints between different brands.
    * Please note all pictures present a huge ...
    by Published on 02-05-2014 02:00 PM
    Article Preview

    Flock is always a great (necessary, some might say!) addition to any miniature model basing. It's a quick way to bring three-dimensional texture and life to a more-or-less 2-D surface. Usually, our choices are limited to green, dark green, brown, etc; and maybe some static-cling grass fibers, or sand and pebbles, or whatever. What's left out? Flowers, ...
    by Published on 01-22-2011 11:08 PM
    Article Preview

    Hi everyone. Here is my first article about how to paint a Space Marine vindicator in the colours of the Blood Angels. As I said, it is my first article here, but hopefully it might still be of some use to people. I painted it up before doing the article, so I have some Paint illustrations to help.

    Paints required/recommended:

    Blood Red
    Vomit Brown
    Blazing Orange
    Flesh (dwarf flesh/elf flesh if you have the man with gun)
    Dark Flesh
    Skorched Brown
    Chaos Black
    Boltgun Metal
    Mithril Silver
    Iyadan Darksun
    Sunburst Yellow
    Dneb Stone
    Bleached ...
    by Published on 10-25-2010 06:29 AM  Number of Views: 65825 
    Article Preview

    In late June I began to build a space helicopter for my Imperial Guard, mainly as a display piece.
    I wanted to loosely base it on the UH-1 Iroquois, or “Huey” as well as on the Avatar’s choppers. The chopper is to secretly insert IG special forces (the so called Tiger Teams) deep behind enemy lines. Compared to real life, this would be a “Pave Low” mission, and for this the basic color of the chopper would have to be black. To go along with the theme of my IG army I named the model after a Greek God –CHARON, the ferryman in the underworld. ...
    by Published on 08-20-2010 12:21 AM  Number of Views: 74075 
    Article Preview

    I've seen many Speedpaint Articles on the net, so allow me to add my version to the quest for the holy grail of getting ...
    by Published on 05-11-2010 01:14 PM  Number of Views: 71640 
    Article Preview

    After some searching for a colour scheme and not being too happy with what I’ve found on the net, I’ve decided to create a tutorial on how to paint death guard my way.  It isn’t the only way to paint these models of coarse, the myriad of detail on these models allow for endless possibility when choosing a sickly pallet suitable for these abominations.  As always, all mixes are approximate in this tutorial, and you should feel free to adjust amounts and substitute colours where you wish. ...
    by Published on 04-29-2010 01:49 AM  Number of Views: 69512 

    This tutorial covers the general process of painting a basic bone coloured Deathwing Terminator for your Dark Angels army. The same technique could be applied to painting any bone coloured model, not just a Deathwing terminator, but as I'm currently working on a bunch of them it's the one on the painting table today.

    Step 1: After Cleaning and assembling the model I’ve given it a thorough priming with a bone coloured primer. If you don’t have a can of bone coloured primer handy you can achieve the same coverage by using an air brush, or simply prime the model white and then with a large brush paint over the entire model with bleached bone. I’ve made sure to prime the model with several coats consisting of short controlled bursts on all sides, this allows for greater coverage and a smoother finish. Two thin coats of primer should be adequate, just make sure to allow each coat to completely dry before applying the next.

    Step 2: Glaze the entire model with Griphonne Sepia Wash. Make sure that your brush isn’t overloaded with the wash to prevent pooling, to do this simply run the brush along the lip of the paint pot to be rid of any excess. This may take some trial and error to get the correct amount of wash on your brush, but have patience.

    Step 3: With a large brush (I used the basecoat brush) clean up the model, and pick out the raised areas with bleached bone. I also highlighted with broad lines around the edges of the shoulder pads and the tops of the knee pads/grieves. In this step these general highlights will determine the general locations of further highlights.

    Step 4: Paint any areas of the model that are to be black, grey or nmm with fenris grey. This will serve as a colour guide for the model and a general base coat for these areas. If you get any grey paint on the adjacent bone coloured areas don’t worry you can go over any touch up areas with bleached bone after you’re done painting the grey.

    Step 5: Pick out the other coloured areas with dark angels green and blood red. If you dilute the paints approx. 1 part paint to 1 part water you can use the paint similarly to a more concentrated wash. The paint should not run but be pushed into the crevices with controlled flow from your brush. If done this way the bone colour beneath should be ample enough to provide highlights ...
    by Published on 12-22-2009 04:03 AM  Number of Views: 82704 

    Telcharion Article

    Painting the Flesh, Robes, Textured Apron, and Base Construction


    For this article, I have painted Telcharion from Enigma’s ‘Massive Darkness’ range. I thought it might make a good article figure, because it is fairly simple, with clearly defined parts – I chose to focus on the painting of the flesh, the robes, and the apron. I also recorded and explained the construction of the base.


    As I have mentioned in previous articles, I think it is worth putting a little time into the preparation of a figure, before the painting begins. Creating a nice, smooth surface with which to work makes life a lot easier, and less frustrating, when it comes to painting, meaning a little extra time at this prep stage can save a lot of headaches later.

    After removing the mould lines carefully by scraping with a scalpel, and filing any particularly rough bits with an assortment of needle files, I used sandpaper (400-800 grade works well) to gently smooth out any other areas that remained rough. After this, I scrubbed the figure with a wire brush – be careful the bristles are not too hard; mine has brass bristles I think, but if you use one with bristles that are too hard, they will scratch the figure and ruin it. Test a new brush on something unimportant first! After this, you can use a toothbrush and wash the figure in warm soapy water, to remove any oil or dust from the surface before paint is applied. This scrubbing with the brushes is what makes the figure shiny and gleaming (sort of!).

    If there is any pitting or cracks in the cast, these can be filled in with a liquid putty, or with milliput mixed with water to create a sort of 'wash'. This wash can be painted liberally over the figure, allowing the milliput to settle in any depressions or marks, resulting in a smoother surface. It can also be gently sanded once dry, if necessary. I find that milliput standard (yellow-grey) works best; I find it a lot easier to work with, than the superfine versions, with which I have encountered problems.

    You can see the figure is standing on a champagne cork in all the following WIP photos. I always paint my figures like this, because I find it a lot easier to hold this way. I drill a hole into the bottom of each foot usually about a centimetre deep, and insert metal wire into each with superglue. Leaving 2 or 3 centimetres protruding from each foot allows the wires to be stuck into the cork to hold the figure, and later, they are used to attach it securely to the base.

    For this figure, I also made a few little adjustments to the face, using a putty mix of greenstuff (a.k.a. duro or kneadatite) and milliput. I mix milliput with the greenstuff, because I find it easier to create a smooth transition between the metal and sculpted areas; also, it means you can sand the putty once dry to be sure it is smooth. These little changes to the face weren’t strictly necessary, merely a personal thing – I just wanted to slightly reposition the brows, mainly. It was a small adjustment to sharpen the facial features a little.


    Base coats, Colour Selection and Contrast

    After undercoating (I used Tamiya Surface Primer spray, which is a mid-grey colour – you can see it on the hammers in the following photos), I painted the base colours onto the main areas of the figure. I find it helpful to paint the bulk of the base colours first, because it lets me get a preview of how the various colours might work together, and helps me make decisions about the main colour scheme. I usually work out the basic colour scheme I want to use before I start painting, but after painting on the base colours like this, I often change my mind about a particular colour once I see it against the other colours in reality, on the figure.

    I like to use quite high colour contrast when painting fantasy figures, because I think that exaggerated colour, lighting and contrast suits the ‘hyper-reality’ of the fantasy world. I think it is worth pushing beyond what might be ‘realistic’; realism has its place, and certainly, when painting historical figures a realistic style might be more appropriate. But the whole point of fantasy lies in its exaggeration of reality, so in my view, it is good to take this opportunity to create a figure with a bit more ‘impact’. I think fantasy is more about strong visual ideas, rather than creating something that looks real.

    With this in mind, I used a few different methods to create contrast within the colour scheme chosen for this figure. First of all, there is a contrast between warm and cool colours: the ‘coldest’ colour present on the figure is the strong cyan colour of the pants, belt and arm straps. This cyan is balanced against the warm, light orange tones of the flesh, and the warm, dark-orange-brown of the apron – cyan and orange are opposites on the colour wheel. The yellow-green of the robes, and the dark red-purple of the boots and other little leather components, are also opposites, both colours lying in-between the warm and cold ‘poles’ of the cyan and orange, and thus perform the role of supporting colours, balanced against each other. In combination, these colours create a sort of ‘quadratic’ colour scheme, with all 4 hues creating an even spread of hues around the colour wheel, and hopefully a balanced scheme which is pleasing to the eye.

    Here’s a little pictorial representation of what I am talking about, with the basic colour palette spaced around a circle representing a colour wheel. Please excuse the roughness of the pic – it's just a quick one to try to show you the main ideas, so excuse the inaccuracies. The cyan is opposite in hue to red-orange, so they are on opposite sides of the circle. The yellow-green and red-purple hues are a little closer in hue to the orange than the cyan, which is why they are spaced a little further towards the orange on the circle. This is compensated for by the fact that the cyan is the brightest, or most ‘saturated’ of all the colours in the palette, and this extra brightness means it has more ‘weight’ in the scheme – it can balance against all the other colours.

    Another way by which contrast is created with the colour scheme, is the balance between light and dark areas on the figure. I tried to make a conscious effort to have a wide range of colour ‘value’ across the figure; that is, rather than using colour that all lie within a mid range of light-dark value, I used areas of very dark colour, such as the apron, hair and purple leather parts, against much lighter areas, such as the flesh. This created a more dynamic look for the figure, with the added value contrast.

    Contrast can also be created by using a wide range of ‘saturation’ or brightness between colours. So, for example, on this figure, there are some very saturated colours, such as the cyan pants, belt and arms straps, and parts of the green robes. Setting these colours against much less saturated, more neutral parts, such as the apron, hair, hammers, and most of the base makes them seem even brighter. If too many strong colours are used in a colour scheme, I think their impact is reduced – saturated colours will compete against each other for attention, and maybe cause a bit of a ‘colour clash’. So I think it is important to remember to have some fairly neutral areas, even when painting in fantasy style.


    The Flesh

    After the base coat, which was a mix of P3 Midlund Flesh, P3 Rucksack Tan and GW Fortress Grey, with a touch of P3 Menoth White Highlight, the first step was to begin identifying the shadows. Using a red-orange colour, I painted a series of thin glazes in the shadows, giving the flesh some colour.

    Then, I continued the shading, using a darker red-brown colour to further emphasise the volumes. It is important to always keep in mind the direction of the light source – you need to have made a clear decision on the direction from which the light is falling, in order to maintain coherence with your shadows and highlights. In this case, I am using top-down or (‘zenithal’) lighting, which is the most common and the easiest to visualise. Just imagine the light falling onto the figure from directly above, as if someone was shining a torch down onto the figure.

    Next, I emphasised the shadows even further, introducing a little dark green-blue into the darkest areas. Because it is applied in thin glazes, the colour does not show up as anything too obvious, but it does add some depth to the overall colour and appearance, in my opinion.

    At this point, I started to apply some highlights. First, I neatened any rough-looking areas with some glazes of the original base colour to blur the blending a little. Then, I mixed P3 Menoth White Highlight with the base colour for the first stage of highlighting, and some touches of pure Menoth White Highlight. I also added a touch more of the dark green-blue in the deepest shadows.

    Read More Read More 20 Comments

    by Published on 10-24-2009 11:15 AM  Number of Views: 63231 
    Article Preview


    I just bought my first Warmachine models some weeks ago. I decided to paint my Cryx jacks with an alternative theme, because I don't like the 'offical' theme very much. I chose bone as my main colour and some corroded bronze and rusted metal to other parts. I painted first one deathripper, and I was pretty pleased on the result. When I was starting to paint the second one, my brother asked me to make a step by step on it. I took many photos to make the tutorial easy to follow.
    Result can be seen here.

    I assume you can do blending. If you don't, look at the CMoN articles page, there's lot of blending tutorials. I also assume you have basic knowledge about NMM(non-metallic metals).

    I suppose you to use wet pallette, because you have to mix paints much.

    Here's how I made it.


    Before painting or assembling, I removed the mould lines and washed the parts. Then I assembled it. The base were made of cork. It wasn't really hard, I just cut some parts of a cork board and cracked them ...
    by Published on 04-03-2009 11:54 PM  Number of Views: 50062 

    Ujahu: part II - painting the figure

    For this article, I decided not to go into too much detail about the specific colours used and technical aspects of the paintwork, but more just document the basic process, and try to give some more broad insights into the general painting method.

    Stage 1: Just a quick pic of the mini after preparation, and ready for undercoating. As I have mentioned in other articles, I always spend some real time preparing figures properly: after removing mould lines ...
    by Published on 04-03-2009 11:22 PM  Number of Views: 51475 

    Ujahu – part I: creating the base

    I have been asked a few times recently about making bases, so I thought I would document the general process this time. It is a fairly simple base – I mean, it is nothing too inventive or original, nothing ground-breaking – but perhaps the basic process I went through might interest some of you!

    Stage 1: Here you can see that I have taken a block of hardwood, and attacked it with a saw on the front corners, to create a more interesting, contoured shape. After roughly cutting chunks from the corners with the saw, I used rough files to smooth the surface and shapes a little, and round off any sharp edges. ...
    by Published on 02-20-2009 07:18 PM  Number of Views: 45132 

    I didn’t quite know where to start as I have acquired quite a few models in a very short space of time. I decided to start with my favourite Circle model and coincidently the leader.
    Kromac.(human form)
    I wanted my circle force to based in a swampy forest, so with this in mind I set about making the base.
    WIP shot 1
     I select my main piece for the base, and set about modifying it to suit the pose I was going to give Kromac (more on that later)
     For this I used a tree stump from Antenociti's Workshop. Added a little greenstuff, and its done.
    WIP shots 2,3,4,5
     I then cut part of the base away, and stuck a bit of the blister pack on the bottom. This will later hold the water in place.
    Top shot
    I then cut up come pins to make mushrooms with and added a little greenstuff.
    WIP shot 6
     Finally I added some fungus to the edge of the tree.

    I wanted to do some more WIP shots, showing different stages of painting, but my cameras’ batteries died.
    WIP 7, 8
     After all the pieces were in place I painted the base and added some static grass
    And Real water©. (If you want to know any colours just ask). ...
    by Published on 02-04-2009 05:39 AM  Number of Views: 61797 
    Article Preview

    Starting to paint this model I had several considerations: to try new orc skin color scheme; to once again experiment with metal colors, which I must confess never were an easy thing for me; to document the whole process as this seems to became my habit already

    First off, the miniature has been cleaned up and primed with black.

    I’m used to paint orcs starting from their skin, this model is no exception. Catachan Green and Scorched Brown mix in 2:1 ratio has been used as a base layer. To highlight the details I have added some Chaos Black to this mix and washed the mini several times, while generally you could omit this step.

    I have used Catachan Green color for the first highlight and Catachan Green and Goblin Green mix in 2:1 ratio for the following highlight. I will limit myself to one picture here as both pictures do not differ much.

    After that I start working with the light. While my previous highlights have been done evenly all over the mini, now the highlights were put on more lighted areas only in ...
    by Published on 10-06-2008 08:40 AM  Number of Views: 87479 
    Article Preview

    Hello again everyone. I have been playing around with the new Citadel Washes and I must say that I love them! I recently ...
    by Published on 04-21-2008 09:40 AM  Number of Views: 76423 

    Alrighty now. Here we go. First article I've made for any site, hopefully you all find it useful in some way so please please please comment on it once you finish going through it.
    Here's the concept. The undead march at night. Not in the morning. Not at noon. Not at tea time. At night. At least that's my opinion and I'm sticking to it. So my goal was to create a paintjob that really reflected this idea.  At night the cells in your eyes responsible for colour vision (cones) just don't function, so you're left with pretty much black and white vision (rods), but that's kind of boring, so instead I tried to stay away from bright colours, and stuck to neutral and desaturated tones as much as I could.

    This guide is broken down into sections and goes layer by layer through the process. I mostly used layering and washing/glazing through out the entire project. If you don't know how to do that, then please look them up in the articles section as I won't be explaining them as I go. I suppose this is enough talking so I suppose I'll get on with it.

    Page 1: Concept and Painting the Bones
    Page 2: Painting the Leather Straps and Cloth
    Page 3: Painting the Metals
    Page 4: Painting the Shield
    Page 5: Painting the Base
    Page 6: Finished

    Please assemble and prime your model before you begin, I've used black primer and I can't guarantee the same results if you use a different colour. I've used citadel paints, including some foundation paints, so again if you are using different paints use a conversion table or something like that or just your best guess.>>

    I. Bones>>

    Step 1: Basecoat the bones of the skeleton in a 1:1 mixture of Adeptus Battlegrey and Dheneb Stone (both foundation paints). Try to get a nice solid colour to start with. I find if you've watered the paint down two layers is probably enough. You don't need to be too neat, just make sure you get all the bones.

    Step 2: Apply a wash made of a 1:1:1 mixture of Chaos Black, Codex Grey, and Graveyard Earth over the entire model. This wash mixture will get used throughout the entire process so if you plan on doing this a lot you may want to mix up a pot of it, or just find a way to keep it from drying out.

    Step 3: Once the wash is dry mix up a 1:1 mixture of Codex Grey and Graveyard Earth and layer it onto the bones, being careful to highlight only the upper surfaces of the bones, and leaving the recesses and lower surfaces darker. Apply a bit more of the mix to the back of the model, as for this one I've chosen the light to be coming from above and behind, you can use any direction you want, just keep it constant through your painting.

    Step 4: Apply another wash made of a 1:1:1 mixture of Chaos Black, Codex Grey, and Ultramarines Blue over the bones. Just apply it fairly thin and let it get into the recesses of the bones, and do its own thing. If you apply it too thick you'll tone down your last high light a lot so try not to be too liberal with it.

    Step 5: When the wash is dry apply a 1:1 mixture of Graveyard Earth and Ice Blue to the upper surfaces and much like in Step 3, but just try to make the highlights thinner, and leave more dark showing. Again add a bit more highlighting to the back, or whichever direction you have chosen for your light source.

    Step 6: Apply a 1:1:1 mixture of Graveyard Earth, Ice Blue, and Space Wolves Grey to the upper most surfaces like before. This time don't highlight all the same places as before, but try to only highlight where the moonlight would be hitting, this may take a while to figure out, but just go with what feels right and it'll turn out fine.

    Step 7: Now finally apply a highlight of Space Wolves Grey to only the top surfaces of the bones, and as before only do the bones that would be most lit by the moon.

    *I have also at this stage cleaned up the model by painting Chaos Black over any areas that got paint on them that weren't bone.

    Ok so we're done the bones, let's move on to the leather straps and cloth.


    II. Straps/Leather

    Step 1: Basecoat all the straps and leather bits with a 1:1 mixture of Adeptus Battlegrey and Khemri Brown (both foundation paints). Again aim for a nice solid colour, but now remember to be careful so you don't have to repaint any of the bone.

    Step 2: Apply a wash made of 1:1:1 Chaos Black, Codex Grey, and Graveyard Earth. Try not to get it on the bones too much, but remember the same wash was used early on in the bones, so if you get it where the bones and leather meet it shouldn't really change the colours too much.

    Step 3: Ok, I'm sorry. I missed taking this picture, but it's pretty simple step so it shouldn't affect you too much. Apply a highlight of a 1:1 mix of Codex Grey and Graveyard Earth. Try to only highlight the tops and upper portions to leave some shading from the other steps. >>

    Step 4: Apply a wash made of a mix of 1:1:1 Chaos Black, Codex Grey and Ultramarines Blue. Apply it more or less like Step 2, just make sure it's not too thick that it tones down the highlights from Step 3 too much.

    Step 5: Apply a final highlight of 1:1:1 Codex Grey, Space Wolves Grey, and Bleached Bone. Apply this to only the very top of the straps much like the last highlight for the bones.

    III. Cloth

    Step 1: Apply a basecoat of Liche Purple. Like always a solid colour is the goal, do as many layers as needed.

    Step 2: Apply a pretty liberal wash of 1:1:1 Chaos Black, Codex Grey, and Graveyard Earth. Try not to be too messy at this stage. You might have to do a couple separate washes for this step, just make sure they are dry before you apply the second coat of it.

    Step 3: Apply a highlight of 1:1 Liche Purple and Scab Red. Try to leave some of the darker dirtier purple showing, but it's not vital at this stage to leave a lot.

    Step 4: Do a highlight of 1:1:1 Liche Purple, Scab Red and Ice Blue. The colour transition is a little harsh so try not to apply it too heavily. Do your best to leave the reddy purple showing in some places.

    Step 5: Apply a final highlight of 1:1 Liche Purple and Space Wolves Grey. Put this only on the edges of the cloth, it should be pretty bright, and you don't want to make it too bright overall.

    Step 6: Do a careful wash of 1:1 Chaos Black and Liche Purple only in the recesses and lower surfaces of the cloth. Try not to get it on the final highlights if possible. You really only want to clean up the shadows and where the purples meet other colours.

    Just a little bit more and we're done this part, so let's move on to the metals.


    IV. Metals

    *Ok, I'm going to apologize in advance for these pictures... They were the best I could do under the circumstances. Try to focus on the helmet or the random plates over the sword. When I get to the shield there are better pictures of the process. >>

    Step 1: Apply a basecoat of Boltgun Metal to the metal bits. Again be careful and aim for a solid colour.

    Step 2: Apply a wash of 1:1:1 Chaos Black, Codex Grey, and Graveyard earth over the metals. Cover them completely, but don't let it pool too much. Two successive washes may be needed.

    by Published on 04-17-2008 10:59 AM  Number of Views: 42171 
    Article Preview

    Painting A Dinosaur the MadPonies way!
    This guide will give a quick, easy, and effective method of painting dinosaurs, lizards, lizardmen, or other figures with reptillian skin.It may work bes on fantasy figures or dinosaurs, as then no one can tell you the flesh is innaccurate.  :-)  For this guide I will use  Deinychus figures from Copplestone Castings.

    1. Starting from black primer, the lower half is done in a medium cork brown.

    2. The same areas are gone over with a thinnish coat, fairly fast and not
    paying too much attention to complete coverage. This is not really a
    drybrush technique, but the effect is similar in smaller areas. The wetness
    and thinness of the coats makes this fast, and still gives some layering and
    texture at the same time. Coat #2 is the color from #1 with more yellowish
    sand colors added.

    3. a mix of the #2 with a lot of off-white added, and a more drybrush-like
    technique to get some ...
    by Published on 04-02-2008 11:22 AM  Number of Views: 49938 
    Article Preview

    Death Korps of Krieg - Mortar teamHello,I dared to write my first tutorial. As I think my painting is quite good I would like to share some experience and knowledge with you...for ...
    by Published on 02-16-2008 05:00 AM  Number of Views: 47000 

    This article is how I prep and paint my Ultramarines at a table top quality. This article is really for beginners ...
    by Published on 01-29-2008 04:19 AM  Number of Views: 41747 

    Hello everyone, I am presenting my last job: the splendid lathiem of La Torre (what a wonderful miniature!) It is for me a “study miniature”, where I wanted to try new techniques.
    Below I translate you the article that I wrote for legio pictorum. Unfortunately  I speak English badly, but I hope that it is understandable although possibly full of errors. Please forgive me for this.
    I hope that it can be useful!

    As a “study miniature” there are a series of things that ...
    by Published on 10-15-2007 01:51 AM  Number of Views: 52094 

    Hello again, and welcome to the speed painting series! First up we have:Eyes!1. Begin by painting the eye entirely black. ...

    Page 1 of 4 1 2 3 4
  •  Articles order

    sort by Set Ascending

    Recent Articles

Privacy Policy  |   Terms and Conditions  |   Contact Us  |   The Legion

Copyright © 2001-2018 CMON Inc.