Help: how do I ungloss?

[vincegamer]

Okay, so I should have stuck to what I knew would work.
However, testing stuff out, I sprayed my mini with Testor\'s Gloss Coat.

Now how do I make parts of the mini unglossy?

Usually I just brush paint the flat parts matt varnish and the shiny parts gloss varnish, but I thought I\'d try out what everyone else seems to do. Now unfortunately I have some very glossy \"wood\" I want to dull, but I want to keep the metal bits glossy.
I\'ve tried brushing matt varnish on the wood, but it doesn\'t do anything.
Any advice short of dullcoting the whole thing then reglossing the metals?

 

[supervike]

I\'m surprised the brush on matt doesn\'t do anything. Maybe a couple of coats??

 

[airhead]

What brand of brush-on are you using?

I\'ve used brush-on DulCoat before. Just have to shake it until all the flatening agent is mixed (the white looking stuff at the bottom of the bottle) I think it is more matt than the spray.

 

[freakinacage]

try shaking it up a lot. i\'v ehad that trouble before and that was why

 

[vincegamer]

Thanks guys. Shaking worked.
Paint you can see separate and thus put on the shaker, but this stuff is just milky white in the bottle no matter how much or how little you shake. A few seconds in the shaker and it worked fine.