http://www.coolminiornot.com/176300
So this is my first work, since attending a painting class by Vincent Hudon. I completed this back in september but just got around to photographing it now.
It pays hommage to (but no where close to as good results) a similar cool colour themed Taurg by MatthiueL.
It uses something I have to work on now to get better, that Vincent taught - glaze techniques. Massive amounts of super thin glazes to slowly tint the model as needed.
The skin was basecoated (with 4 thin basecoat layers) with a mix of snakebite and space wolf grey. Then some added snakebite to bring up the brown, to the darker areas. Then added blues and purples.
Turqouise and blue/purple inks and black were used throughout the model after the basecoat.
The 2 crystals are from...a company that I can\'t remember the name of (I have the link at home). THe base I made via apoxysculpt.
I am very happy with the glazed blends on the leg muscles and the axe.
Errors:
Some known issues that I realized after I decided to stop work on it...
1) the freehand tattoo on teh back, unlike the ones on the leg/arm is just too rough/thick. I should hvae removed it and started over
2) there are small drops of blue on the lighter areas of the muscles, from paiting other areas and not noticing the drops sprinkling all over
3) the colours, I notice now, aren\'t deep enough to see. Only on parts of the legs is is visible the change to purple. Most of the model, I should have done more deeper glazes. I may go back over it during the holidays and add some more depth to the muscles, since I like this model so much.
Regards,
Sanjay
So this is my first work, since attending a painting class by Vincent Hudon. I completed this back in september but just got around to photographing it now.
It pays hommage to (but no where close to as good results) a similar cool colour themed Taurg by MatthiueL.
It uses something I have to work on now to get better, that Vincent taught - glaze techniques. Massive amounts of super thin glazes to slowly tint the model as needed.
The skin was basecoated (with 4 thin basecoat layers) with a mix of snakebite and space wolf grey. Then some added snakebite to bring up the brown, to the darker areas. Then added blues and purples.
Turqouise and blue/purple inks and black were used throughout the model after the basecoat.
The 2 crystals are from...a company that I can\'t remember the name of (I have the link at home). THe base I made via apoxysculpt.
I am very happy with the glazed blends on the leg muscles and the axe.
Errors:
Some known issues that I realized after I decided to stop work on it...
1) the freehand tattoo on teh back, unlike the ones on the leg/arm is just too rough/thick. I should hvae removed it and started over
2) there are small drops of blue on the lighter areas of the muscles, from paiting other areas and not noticing the drops sprinkling all over
3) the colours, I notice now, aren\'t deep enough to see. Only on parts of the legs is is visible the change to purple. Most of the model, I should have done more deeper glazes. I may go back over it during the holidays and add some more depth to the muscles, since I like this model so much.
Regards,
Sanjay
