Article: Making Army Transport Trays for Storing Figures

[JesterzUSMC]

You can view the page at http://www.coolminiornot.com/articles/content.php?1824-making-army-transport-trays-for-storing-figures&

 

[Byteknight]

I guess the foam can be done within tupperware. What kind of "foam" do you mean, though? Thanks.

 

[Menelker]

It is the kind of foam that fabric stores carry in about 30"x6' sheets. It is medium to high density and they should have a corner somewhere where they will have a large stack of different thicknesses.

 

[fiesta0618]

This is a strategy I stumbled upon myself, and I have one further idea...cut NONE of the holes all the way through, and store "standing" figures base-side-up. That way, you need not grab the painted body when you pull 'em out, just the base.

 

[Styvrn]

Foam called plastazote is good too, it's a bit softer so can be cut to hug the base. If anyone is lucky enough to work near a laser cutter, it cuts beautifully!

 

[Styvrn]

Foam called plastazote is good too, it's a bit softer so can be cut to hug the base. If anyone is lucky enough to work near a laser cutter, it cuts beautifully!

 

[Menelker]

You can view the page at http://www.coolminiornot.com/articles/content.php?1824-making-army-transport-trays-for-storing-figures&