Article: Sculpting Work in Progress
- Thread starter Ogrebane
- Start date
freakinacage
Well-known member
hows about an update pic klute? don\'t want this thread to die!
darkartminiatures
New member
Heres an update of me sculpting me. I\'ve nearly done but i would of liked it alot smoother than it turned out. Oh well...on to the next fellow student in my class.
darkartminiatures
New member
I shall have to try using them...thanks Klute. 
I\'ve just been using wax carving tools and water.
Nice job on yours so far.
I\'ve just been using wax carving tools and water.Nice job on yours so far.
I mostly use a Wax5 and needle and the shapers.
For lubrication on a warm day I will use the oil from the skin on my nose or forehead. Sounds disgusting I know but its handy. If Im all dry I rub some vaseline on the back of my left hand. Just a tiny bit though as its worse to apply putty over smoothed areas like this. Spit is also often used.
:|~
For lubrication on a warm day I will use the oil from the skin on my nose or forehead. Sounds disgusting I know but its handy. If Im all dry I rub some vaseline on the back of my left hand. Just a tiny bit though as its worse to apply putty over smoothed areas like this. Spit is also often used.
:|~
dolphin
Here is my gift for shilpa. began the sculpey work last night.
Now, problem I am having, how do I smoothen super sculpey? Turpenoid and a brush is what I read somewhere, but that may only be for fine smoothing, but for rough creases, etc? Finger with a glove on it or something else? I know once it\'s baked, I can sand out any last errors I find but still....
Any ideas?
Sanjay
Here is my gift for shilpa. began the sculpey work last night.
Now, problem I am having, how do I smoothen super sculpey? Turpenoid and a brush is what I read somewhere, but that may only be for fine smoothing, but for rough creases, etc? Finger with a glove on it or something else? I know once it\'s baked, I can sand out any last errors I find but still....
Any ideas?
Sanjay
T
Tyron&Magda
Guest
I like your work, congratulation Klute!!!
green stuff
Active member
Looking very good Sanjay . Fingers with gloves can be a solution. Otherwise a smooth and soft surface tool will help you get a more even finish. In some art stores you can find a \"rubber brush\" (translation?). Basically it\'s a brush with a shaped erasor on the end (it can be home made). Another solution, that I\'ve been using for some time now is taking an old brush and putting excess GS on on end and to give it the desired shape. That way I can make larger flattening tools than what I can find in my store. Since GS is rubbery, it\'ll help give a smooth surface.
. Fingers with gloves can be a solution. Otherwise a smooth and soft surface tool will help you get a more even finish. In some art stores you can find a \"rubber brush\" (translation?). Basically it\'s a brush with a shaped erasor on the end (it can be home made). Another solution, that I\'ve been using for some time now is taking an old brush and putting excess GS on on end and to give it the desired shape. That way I can make larger flattening tools than what I can find in my store. Since GS is rubbery, it\'ll help give a smooth surface.Thanks T+M
@Greenstuff.....thats an excellent idea with the GS tool tips.
@Sanjay.....you dont do things by half do you.
You have a really sound base there for the dolphin.
When smoothing out large areas of bodyfiller at work I would use a long thin piece of plywood dragged over it.
Maybe the same idea with plasticard would work to smooth large areas of sculpey/ fimo.
@Greenstuff.....thats an excellent idea with the GS tool tips.
@Sanjay.....you dont do things by half do you.
You have a really sound base there for the dolphin.
When smoothing out large areas of bodyfiller at work I would use a long thin piece of plywood dragged over it.
Maybe the same idea with plasticard would work to smooth large areas of sculpey/ fimo.
green stuff
Active member
@Klute : Well you know how you always have excess GS after a sculpt; that\'s one of the ways I\'ve found to still make it useful. I also make stamps and some become base rocks (got the idea from MB; cut up GS has great strat motifs if you fold it to mix it). Ansquer makes tree barks out of his.
green stuff
Active member
LOL . Gaël does heads like you and skulls too.
. Gaël does heads like you and skulls too.Legacy Account
Active member
Rooney the pirate!
lol
Good old Potato-Face!
lol
Good old Potato-Face!
freakinacage
Well-known member
ok, i was being slow there. nice name!!! where do you get the rubber shapers from cause i cant find any?
