Beginer questions... =)

Ritual

New member
Personally, I wouldn\'t use black primer when painting red. It will make it more difficult to get an even coat (but, red is notorious for being difficult to get even coverage with). I find grey is the best option there. It will take a couple of coats before you have even coverage, and it will take practice to get the hang of how to do it properly.

Let me also point out that whatever tecnique, simple or advanced, you may try to learn you won\'t get past the practice bit. You can read and read an read and think that you know exactly how to do something. But, when you try it out for yourself you\'ll be disappointed. You must learn a lot of things for yourself by practicing and getting a feeling for how paints behave, how different dilutions behave etc. There\'s no way an experienced painter can get every single piece of information and knowledge of importance into an article. What we do relies on a lot of almost intuitive knowledge that we don\'t even think about when painting because it\'s so firmly embedded in our minds that we use it without thinking. This knowledge you need to build up for yourself.

Also, take into account that there are hundreds of ways to do something and what one painter says may differ from what another painter says, even though it deals with the same subject. It may even be so, that the method one painter uses may not work out for you at all. So, that\'s another reason why you need to practice. You may need to try different methods before you find out what works out for you. Even though you want to achieve similar results to Vincent Hudon\'s you might not end up using exactly his techniques.
 

GobboTeef

New member
If people are having trouble with GW white primer, try heating it slightly first, not too much obviously as it will explode ending in ultimate death from whoever owns the house. It does make it a lot better, so just do that and shake well and it removes any of that dustyness.
:D
 

freakinacage

Well-known member
Originally posted by El Matador

Then use progressevly lighter reds eg, scab red, red gore, blood red up untill your final highlight, and darker reds for the shadeed areas?
its up to you mate, you can either start dark and highlight up, start light and shade down or start and any of the points in between and hight light and shade as you wish. it\'s about what works for you

and gobbo teef is right, gently warm the bottle if you are having probs (just in a bowl of tpid water for a bit -NOT the microwave!! :eek:)
 

El Matador

New member
Hey guys,

i tried again last night on a dreadnoughts right arm, and it worked perfectly, i just used lots of layers (especially the first coat of red on the black) and this time it gave me an extremely smooth coverage and the colour transitions where suttle until i came to the stage where i was applying a mix of 75% blood red to 25% red gore (the first time there was more blood red than the other colour) and it appeared orange and chalky. I not really sure why this happened, however i was happy at how it turned out after i put a darker colour ontop and redid it.

Im pleased at how it looks but is it normal for results to be so erratic? I assume its because i need to learn were to appy the paint better.

Thanks alot guys, El Matador

edit: hey dragonsreach :) (check your e-mails)
 

Sauce Devil

New member
Practice makes perfect. :)
I wish I could give you more advice but I\'m in the same situation you are trying to figure out why some colors don\'t come out the way I want them too.

I make mistakes, cover them up and try again and after a while I get a feel for what works.

I recently painted a plastic chaos knight (bought for pennies on eBay) and it looked awful with red painted over a black undercoat, very crude and \"blobby\".
But then I shaded it heavily with a near-black and it suddenly changed to something looking more like a decent mini - not the bright red I had in mind but a distinct improvement.
 

El Matador

New member
Hey,

Sauce devil i had actually bought a dreadnought a while ago and it was still in the box and it comes with some extras so ive been practising on a hevy bolter, im not quite sure what it does in game terms (i play fantasy but have no idea about 40k hehe) but ive been practisieing painting it.

I had a really smooth finish and the colour transitions where as smooth as i had acheived :) and then i put some baal red wash over it to try and make the orange more red and successfully ruined it hehe. It looks like someone has just touched something greasy like a sausage and touched the paint as it loks greasy ???... hmm... i think ive got a basic grasp of the paint but the wash is still unknown to me hehe ... well of to practise again i suppose hehe:)

Thanks guys for the relpies, any ideas why the wash is streaky and \"greasy\"?
 
Back To Top
Top