Originally posted by absolutrudy
I\'m on the verge of buying some W&N Series 7 brushes...
If you\'d like some alternatives that are as good or better, usually for a better price, have a look at the last post on
this thread on planetFigure.
Originally posted by absolutrudy
...but my technique for cleaning my current brushes still leaves me with hook tips.
You\'re not doing anything wrong, I\'ve had this happen frequently after a single use of many nylon brushes. Hooked tips on brushes is only a problem with synthetic fibres AFAIK - check this past thread for more on the same issue: http://www.coolminiornot.com/forums/viewthread.php?tid=8820
Originally posted by absolutrudy
I use a Loew Cornell brush cleaner and water to get the paint out. Any suggestions or method changes?
Rinse your brush well and often during painting, particularly if you live in a dry climate.
Use a double-bath system with a couple of drops of dishwashing liquid in the water - one large container for the bulk of cleaning, the second for final rinsing and for diluting your paint.
Master\'s brush soap is pretty good stuff but most any mild hand soap is fine for washing brushes - Simple would be good, being neutral in pH - although with Kolinsky I would recommend you do this as little as possible (any friction wears the hairs down). If you find you get paint buildup at the base of the hairs near the ferrule too easily you\'re not rinsing often and/or thoroughly enough during painting
When you do get dried paint residue on the hairs a little ammonia or isopropyl alcohol will loosen it and help it wash out.
After using soap or any solvent other than water on your brushes it\'s not a bad idea to roll the bristles in hair conditioner and leave it in until your next painting session, just swish the brush out in the rinsing water when you\'re ready to paint next time.
Einion