For the first time I used GW clear matte finish to get rid of the gloss caused by using an ink wash. For some reason it seemed to start dissolving and mixing with the ink and leaving a less than desireable finish. The mini had been drying for at least 24 hours so I\'m sure it was dry. Has anyone else had this type of problem?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Clear matte finish
- Thread starter Ratcals
- Start date
It sounds to me like you used too much.
I did that a couple of times, at first.
I abandoned the spray, and bought myself a bottle of Liquitex matte varnish, because I couldn\'t find any Testors.
If you were using the brush type instead of the spray, then it still sounds like you used too much in one spot, or you may need to add a couple drops of water?
Any more expert thoughts than mine?
I did that a couple of times, at first.
I abandoned the spray, and bought myself a bottle of Liquitex matte varnish, because I couldn\'t find any Testors.
If you were using the brush type instead of the spray, then it still sounds like you used too much in one spot, or you may need to add a couple drops of water?
Any more expert thoughts than mine?
