Eldar Ethereal Stalkers WIP

So im seriously bored of Marines and like the look of eldar. Picked up this model for 20p!!! at a boot sale which turned out to be Eldrad. See pics.

This will be a wraith guard army, iv currently got ten wraithguard, army box, wraith lord and dark reapers coming. Here is the colour sceme i settled for.

16012011090.jpg


16012011091.jpg


Please leave any feedback you think could help me.

thanks guys
 

BPI

New member
Hi MOF, I'd suggest switching the colour of that red purse to green, to pick up the colour of the gems at the top of the model. Other than that, nice first step on your Eldar army. Do you intend to fine the blends on this character fig or is it consistent TT that you're going for?

Cheers, B.
 

Prophecy07

New member
I feel like the face in the staff could use a little bit more definition. It took me a moment to even be able to pick it out. Really love your color scheme. Nice gem, too.
 
I shall change the pouch. The whole idea of this army is to paint each figure to the best of my ability. BPI how could i blend the colours? Anything painted brown is the base colour for the gold wraithbone, the staff has been neglected thus far.

thanks everyone
 

BPI

New member
Hi MOF, it's the purple that's jumping out at me most as needing smoothing out. Mainly because Warlock Purple really doesn't play very nicely with Liche Purple (Worm Purple). Been there & done that :) I'd stick with the Liche as the basecoat, shade it back with addition of black (will also be darklining around the grey pouches, etc. as you shade to aid with definition), then highlight up by mixing it lightly either with a blue (Space Wolf perhaps) or a fleshtone (Elf Flesh). That alone should help it to sit together more happily & will really help the brown/yellow stand out nicely. I'd be wary of bringing the purple up to white highlights as it'll steal focus from the head. Give it a bash on one of the new plastics you've got as a trial run before overpainting your work here though.

For actual blending technique advice I'd check the Sticky Thread or tutorials :)

The brown bit coming out of the back of his head & on the chest looks fine, the soft blue on the sword looks nice, perhaps push toward white at the tip?

Once you've found the colour scheme that you're happy with the rest of the troops should fall into place quite quickly. Keep it up :good:

Cheers, B.
 
Thanks bpi, iv a spare guardian somewhere il try it out on. The white highlight is tentacle pink, the flash from camera musta glared a bit.

Here is a what iv done tonight but have had a few beers so going to stop.

25012011099.jpg


25012011100.jpg


First wraithguard, nice minis but bloody expensive. Ten of them to paint.

25012011103.jpg


25012011104.jpg


And im going to use the new sorceror from the Island of blood fantasy range.

25012011105.jpg
 

BPI

New member
Hi MOF, try putting a little piece of white kitchen roll (paper towel) or similar over the flash on your camera, I've read about people doing it before to kill some of that glare :)

Cheers, B.
 
Tried a bit of this blending lark, for the record im not confident at this and NEVER experiment. The paint job so far was lich purpel, warlock purple, pink using the next colour up to highlight. It looks really harsh, especially the wraith lord. So BPI i fully hold you responsible for the next pics. He was done using liche purple, then a mix of it with elf flesh. Im quite happy with it! lol

25012011110.jpg


25012011107.jpg


25012011106.jpg


Thanks BPI!!
 

cassar

BALLSCRATCHER
seems a lot better, just out of interest whats the flash on your camera....million candle power, careful your minis dont melt lol.
 

cassar

BALLSCRATCHER
i use the mobile too i find its a lot better if you dont have to have the flash on i just take my stuff to the best lit room in the house and put all the lights on. you picked a real tough colour to start your blending career with nothing like jumping in the deep end oops pun alert lol
 
Last edited:

Torn blue sky

New member
Blending's about 100% better already. See, this is why you need to experiment! Aye , ok you might completely f*ck it up, but you learn somat from it. Looks like you've plenty of potential, just use it! =P
 

BPI

New member
Hi MOF, nice start :) Next time, flat purple basecoat. Then mix the purple 50:50 with black, then water it down a bit. If you were to put a wash over it, you can imagine where it would all settle. Don't wash it! Just paint the dark mix into all of those recesss & shady areas. Then paint in the purple 50:50 with flesh as you did on the one above. As a very vague rule of thumb, try to end up with the model 1/3 of each of the three colours. Certainly don't have the highlight colour meeting with the shade colour everywhere (a problem I used to encounter a lot) as you lose all of your basecoat colour & the graduation you're aiming for :) Nice neat 3 colour layering is a great way of painting with a speed effective enough to complete larger projects (says Mr. Slow :)).

Cheers, B.
 
Thanks everyone, i was going to a bit of work tonight but i got a late christmas pressie i decided to drink. I never heard of it but its called
slow Gin. Took a shot with ice. OMG its potent!
 
Was in no state to paint last night. After i posted i could have sworn i passed out without fainting.........

Few pics of me practicing

27012011118.jpg


27012011117.jpg
 
Back To Top
Top