GW paint price gripe *grab a beer*

Aliengod3

Active member
On top of the sales tax increase I just found out that because of budget cuts to my college summer school was canceled so I cannot take the classes I need to get my degree... :mad:
 

freakinacage

Well-known member
Originally posted by Aliengod3
On top of the sales tax increase I just found out that because of budget cuts to my college summer school was canceled so I cannot take the classes I need to get my degree... :mad:
what?! that\'s madness!
 

hestan101

New member
yes, it is daylight robbery, but by the same token im too lazy to mix up my own colours. i do havea lot of vallejos, but i agree with waxy comments, to me they are, especially the yellows
 

markstorch

New member
I\'m sorry, but $.20 more for a pot of paint doesn\'t hold a candle to my new favorite GW insanity.

I walked into my local shop because I needed a new can of black primer. I had resigned myself to the fact that what used to be an $8 can of primer was $10 as of the last time I picked one up and so I walk in and almost hit the floor when they are charging $15 for black primer.
 

Aliengod3

Active member
There is a concept that is tossed around in one of many marketing classes called just noticeable difference (JND) which talks about how depending on the initial price of something any increase or decrease in price can seem intolerable. If the price of a $40,000 car goes up by $1,000 it is not that noticeable because the relative price is so high. This would be an increase that would be considered JND. However when a paint pot price increases by roughly 13% from $3.20 to $3.70, even though 50 cents is far less than $1,000, that is a large difference in price and is way beyond a just noticeable difference.
 

Shawn R. L.

New member
Originally posted by markstorch
I\'m sorry, but $.20 more for a pot of paint doesn\'t hold a candle to my new favorite GW insanity.

I walked into my local shop because I needed a new can of black primer. I had resigned myself to the fact that what used to be an $8 can of primer was $10 as of the last time I picked one up and so I walk in and almost hit the floor when they are charging $15 for black primer.

Krylon or Rust Oleum are just fine for a lot less $$.
 
S

Shadzar

Guest
Originally posted by crazyboyae1
Originally posted by Dragon Forge Design
By the way, I can remember when gas was .60 cents a gallon and a brand new movie was $4.00 at the theater..

Jezz when were you born?! 1800s?
lol

HEY! I remember gas prices like that as well as penny candies.

Well if anyone knows how to make old pots of GW paint come back to life, then I would like to know with these 400 pots I have that are starting not to even be helped with weekly shakings.

Vallejo pretty much is the same paint. I am torn whether to switch to it or Reaper.
 

Ebonbuddha

Active member
Amen Shawn. I never bought a can of GW\'s over price primer. But, since living in Asia, I have switched to Gesso paint on primer. A four dollar jar lasted two years. It would have been longer if I had closed it correctly.


Originally posted by Shawn R. L.
Originally posted by markstorch
I\'m sorry, but $.20 more for a pot of paint doesn\'t hold a candle to my new favorite GW insanity.

I walked into my local shop because I needed a new can of black primer. I had resigned myself to the fact that what used to be an $8 can of primer was $10 as of the last time I picked one up and so I walk in and almost hit the floor when they are charging $15 for black primer.

Krylon or Rust Oleum are just fine for a lot less $$.
 

Einion

New member
Originally posted by markstorch
I\'m sorry, but $.20 more for a pot of paint doesn\'t hold a candle to my new favorite GW insanity.

I walked into my local shop because I needed a new can of black primer. I had resigned myself to the fact that what used to be an $8 can of primer was $10 as of the last time I picked one up and so I walk in and almost hit the floor when they are charging $15 for black primer.
First off, Chaos Black I presume? And if so it\'s not a primer.

Cheaper alternatives are widely available, ideally sprayed on after actual primer :)

Einion
 

Aliengod3

Active member
I think the current GW primer formula works great. It dries quick and does not mess up the details like that last formula did. They also changed the spray nozzle and the spray goes not cake around the nozzle as much. It also does not get all over your finger. However that price is terrible. $15 is a rip off. We all know their stuff is made in sweat shops so why can\'t we see some sweat shop pricing (cheap)?
 

airhead

Coffin Dodger / Keymaster
Originally posted by markstorch
I\'m sorry, but $.20 more for a pot of paint doesn\'t hold a candle to my new favorite GW insanity.

I walked into my local shop because I needed a new can of black primer. I had resigned myself to the fact that what used to be an $8 can of primer was $10 as of the last time I picked one up and so I walk in and almost hit the floor when they are charging $15 for black primer.
Then why are you buying the worst primer on the market? Krylon is better primer, Duplicolor is better than that.

For way less money.


*****

And I remember gas at 23.9 cents per gallon - take two coke bottles back, get a half gallon of gas and mow the yard.
 

Aliengod3

Active member
Originally posted by airhead
Originally posted by markstorch
I\'m sorry, but $.20 more for a pot of paint doesn\'t hold a candle to my new favorite GW insanity.

I walked into my local shop because I needed a new can of black primer. I had resigned myself to the fact that what used to be an $8 can of primer was $10 as of the last time I picked one up and so I walk in and almost hit the floor when they are charging $15 for black primer.
Then why are you buying the worst primer on the market? Krylon is better primer, Duplicolor is better than that.

For way less money.


*****

And I remember gas at 23.9 cents per gallon - take two coke bottles back, get a half gallon of gas and mow the yard.

Does Krylon cause nasty build up on the mini when it is sprayed on?
 

Torn blue sky

New member
Originally posted by waghorn41
Originally posted by Ebonbuddha
What?!?!?!?


Originally posted by Aliengod3
GW condoms are real.

Is that to protect some of the dicks that work there?

lol it\'s funny, because it\'s true!

Aside from bad jokes; I\'ve come into a bit of a dilema regarding paint myself! I noticed that GW paint has gone up stupidly in price (regarding the amount of comercial interest in their products I can\'t figure out why either), I was wondering about the versatility and general application of Vallejo.

I\'ve heard they\'re just as good (if not better) than citadel. And I have seen some epic pieces painted on here using this line. Further to the fact I saw mike putting forward something about the airbrush metallics (which is a bonus since I like using metallics).
Cons I hear are bad seperation and a \"waxy2 consistancy. Yet the paint stay on the palate for a good while rather than GW drying up under strong light.
Which is also a con seeing as you have to wait for that layer to dry lol

Thoughts?
 

Einion

New member
Originally posted by Torn blue sky
Aside from bad jokes; I\'ve come into a bit of a dilema regarding paint myself! I noticed that GW paint has gone up stupidly in price (regarding the amount of comercial interest in their products I can\'t figure out why either), I was wondering about the versatility and general application of Vallejo.

I\'ve heard they\'re just as good (if not better) than citadel.
Some people will believe they\'re better, some will adhere to GW\'s being better.

Opinions vary; it\'ll usually come down to personal preference as much as anything.
http://www.coolminiornot.com/forums/viewthread.php?tid=32452
Originally posted by Torn blue sky
Cons I hear are bad seperation and a \"waxy2 consistancy.
Waxy? Don\'t remember reading that.
Originally posted by Torn blue sky
Yet the paint stay on the palate for a good while rather than GW drying up under strong light.
Which is also a con seeing as you have to wait for that layer to dry lol
We practically never have to wait for paint to dry, but if you find it\'s drying too slowly on the mini surface break out the hairdryer!

Einion
 
Back To Top
Top