I want to buy an airbrush and compressor.

[droogie77]

http://cgi.ebay.co.uk/Spraymaster-Baby-Compressor-Airbrush-Starter-Kit_W0QQitemZ290323397179QQcmdZViewItemQQptZUK_Crafts_DrawingSupplies_EH?hash=item43989f7a3b&_trksid=p4634.c0.m14.l1262&_trkparms=|301%3A1|293%3A1|294%3A30


I have been looking to buy one for ages now, would this be a good one to start off with?

 

[plattokeefe]

im no expert on airbrush\'s but that looks like a load of rubbish.

i recently bought an airbrush and compressor of this site http://www.everythingairbrush.com/ and there fantastic, you should give them a try.
the models i got were AB-AS186 compressor, AB 130A airbrush and the hose was the AB 24 with shipping it cost £128. 93 its alot more than that one you linked but its worth the money.

hope this helps

regards rich

 

[Einion]

In case you didn\'t see it at the time do check out this thread, there should be a good amount of overlap in the info:
http://www.coolminiornot.com/forums/viewthread.php?tid=32285

Follow-on threads here:
http://www.coolminiornot.com/forums/viewthread.php?tid=32414
http://www.coolminiornot.com/forums/viewthread.php?tid=32741

If you don\'t get any specific input on the eBay listing here try a Google search, bound to be some info on the AB or the compressor somewhere!

Einion

 

[droogie77]

Thanks for the feedback guys. I did some searching on ebay and found this.

http://cgi.ebay.co.uk/COMPLETE-AIRBRUSH-KIT-AIRBRUSH-COMPRESSOR-AIR-BRUSH_W0QQitemZ350210468907QQcmdZViewItemQQptZUK_Crafts_DrawingSupplies_EH?hash=item518a2bac2b&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1688|240%3A1308|301%3A1|293%3A1|294%3A50

I have a limited budget and this seems good for the price.

 

[airhead]

I like the looks of that compressor. Comes with moisture separator, but you still need a regulator (add another $20 +/- to that total).

Airbrushing is one of those markets that you tend to get what you pay for. I\'m not saying you need a $300 airbrush and a $500 compressor, but....the lower end stuff tends to be either re-labeled badger or some sort of knock-off that you\'ll never be able to find parts for. You will need parts. Needles and cones get damaged or just seem to wear out.

****

What are you wanting to do with an airbrush?
Prime and clear? A decent single action external mix badger will do that for you.
Shoot cammo patterns on model armor? You\'ll need a bit better gun. Double action, preferably top-fed with a nice needle.

Personally, I\'d pass on that package deal. I\'m not familiar with the brand (it may be a good one over in EU) and there is a key piece missing in the package (regulator). Hope that helps.

 

[Shawn R. L.]

Drag the shipping would be so much, I have both I\'m looking to unload. Campbell Hausfield 3 gallon tank compressor and some airbrush I can\'t remember what it is.