Malupro's first Project Log [WIP]

M

malupro

New member
Hey ho, im 24 Years old and live in Germany. The Aim of this Project Log is to improve my painting Skills and to have a summary of my proceedings. I have just started with painting Miniature so every critique is welcome.

My first step ist to get a nice looking Space Wolves Army and to lern the Basics of Miniature painting. My ambition for the future is to collect experience and to paint show case Miniatures.

After i read a couple of Threads, Tutorials. I started to paint my first Miniature.

See the intermediate result after 3 Hours:

dsc05824o.jpg



dsc05826o.jpg


I have got a first question: Am i using to thick colors? I water them down to a consitency of "milk" and use a "wet-pallet" but the larg surfaces doesnt look realy clean.
 
Last edited:
C

cheelfy

New member
Welcome here malupro. Nice start for your first mini. For your little problem, when you dilute your paint, you have to paint more layers to get something uniform.
 
N

nosirrahkcaz

New member
great start, I wish my first mini's looked like that. As far as the thickness, the paint might be too thick, but it looks like you didnt let the first layer dry all the way before you put the next on which will give an effect like that, just a guess. Also light colors over a black undercoat are difficult to get without the lines as well. Good start, just keep trying new things and you'll learn, just takes time and effort. Good Luck
 
CreganTur

CreganTur

Member
As a general rule you should expect to do 2 - 3 passes on your base coat when you're using wet pallette. If your paint is requiring more coats than that then you know it's watered down too much.

When I put fresh paint on my wet pallette I use a toothpick to stir it a little before use- this works a little more moisture into it. If I need a thinner mix I add small amounts of water at a time, being careful to fully mix it into the paint before adding more.

Paint consitency is something you really learn with practice.
 
Last edited:
E

exilesjjb

New member
as said above the paint thinness is ok you just need more layers, as for the figure looks very good keep up with this and you will have your wish of a great looking army very soon
 
M

malupro

New member
in the Holidays i found some minutes to work on my miniature. that is the result, i im not happy with it, its realy difficult to paint all the little stuff for me. i would be glad for any crituque and hints what i can improve. :brushwave:
the white eye dots are realy to big, i have painted them with a 3/0 brush, maybe nexttime i will try it with a toothpick.

i wish everbody a happy new year!:drink:

dsc05832.jpg


dsc05833o.jpg


dsc05834r.jpg
 
Last edited:
CreganTur

CreganTur

Member
Brush control is the issue more than the size of the brush. As long as the brush can hold a fine point, then you can do a lot with it. I can do eyes with a rosemary & co 0 brush because it's got such a good tip. Doing little dots is hard so I'd suggest practicing them.

If you're having trouble seeing the little details to work with them you can always get a magnifying visor or something similar to work with.
 
CreganTur

CreganTur

Member
No, not drybrushing at all. It was done probably with glazes of successfully lighter tones for highlights and darker shades for shadows.

There are a lot of great articles on glazing and blending, which are the two skills you'll need to doa n effect like you want.
 
V

Van Hoering

New member
First of all, I would'nt worry if I were you. You're doing great for a beginner! Your first attempt looks like it's gonna be a solid tabletop quality. Back in the days were I started painting, with no Internet and all the good advice you can now find online, it took me a few years to achieve this level.

Now for advice any painter worth his salt would give you: THIN YOUR PAINTS DOWN! Water down your paints so that it will take you at least three passes to get a good even basecoat. That way you will do justice to the fine sculpting of your minis.

To wash and glaze, don't rush! If you put too much diluted paints for shading, you'll end up with streaks and puddles, dirtying your mini instead of shading it! Best to take your time, even if you have to reapply the same wash thrice before getting a visible effect.

You might find it helps to add a droplet of dishwashing liquid to your washes (or use a mix and water and acrylic floor wash).

If you have trouble painting all the small details, just work on your painting stance: make sure your seat is comfy, rest both elbows on your work table, hold the mini (glued to an old paint pot or something) with your off-hand, and clasp that off-hand with the last two fingers of your painting hand (you'll need the thumb, index and middle-finger to hold your brush, of course).

Then try to control your breath, much like in Chinese traditional painting and calligraphy. Breathe in, brace yourself, and deliver your brush stroke while breathing out...It helps, especially when painting those little bugger's eyes.

Also, don't hesitate to buy the best brushes there are. A good number zero sable brush, if you clean it properly, will last you several years and will keep a sharp point. Much better for detailing than a cheap 000 brush, as the hair will retain more paint and allow for better control. Just make sure you wipe out the excess paint every time you dab it into your mix...

Hope that helps!
 
Last edited:
V

Van Hoering

New member
First of all, I would'nt worry if I were you. You're doing great for a beginner! Your first attempt looks like it's gonna be a solid tabletop quality. Back in the days were I started painting, with no Internet and all the good advice you can now find online, it took me a few years to achieve this level.

Now for advice any painter worth his salt would give you: THIN YOUR PAINTS DOWN! Water down your paints so that it will take you at least three passes to get a good even basecoat. That way you will do justice to the fine sculpting of your minis.

To wash and glaze, don't rush! If you put too much diluted paints for shading, you'll end up with streaks and puddles, dirtying your mini instead of shading it! Best to take your time, even if you have to reapply the same wash thrice before getting a visible effect.

You might fing it helps to add a droplet of dishwashing liquid to your washes (or use a mix and water and acrylic floor wash).

If you have trouble painting all the small details, just work on your painting stance: make sure your seat is comfy, rest both elbows on your work table, hold the mini (glued to an old paint pot or something) with your off-hand, and clasp that off-hand with the last two fingers (you'll need the thumb, index and middle-finger to hold your brush, of course).

Then try to control your breath, much like in Chinese traditional painting and calligraphy. Breathe in, brace yourself, and deliver your brush stroke while breathing out...It helps, especially when painting those little bugger's eyes.

Also, don't hesitate to buy the best brushes there are. A good number zero sable brush, if you clean it properly, will last you several years and will keep a sharp point. Much better for detailing than a cheap 000 brush, as the hair will retain more paint and allow for better control. Just make sure you wipe out the excess paint every time you dab it into your mix...

Hope that helps!
 
G

generiUser

New member
lol to the comment above .

back on subject. ive only got one thing to say. dont worry about it dude you'll get better along the way.
 
You must log in or register to reply here.
Back To Top
Top