Solid water resin

[mabnkat]

Hi guys

I'm wanting to use the solid water resin to make a pond but I want a clear see through edge to it... I've tried a few different ways but it always ends up cloudy..

Is there any good "how to's" about ? I've tried searching but found nothing :-(

Thanks for any help

 

[Milosh]

This is a good one. You need to be exacting when cutting your plasticard dams to make sure you have a tight fit. You might try spraying the dam with cooking spray so that no resin wants to stick to it. Hopefully other people will chime in with more tips.

http://midnightlurkerminis.com/waterbase.html

 

[mabnkat]

This is a good one. You need to be exacting when cutting your plasticard dams to make sure you have a tight fit. You might try spraying the dam with cooking spray so that no resin wants to stick to it. Hopefully other people will chime in with more tips.

http://midnightlurkerminis.com/waterbase.html

Great thanks

 

[Einion]

I'm wanting to use the solid water resin to make a pond but I want a clear see through edge to it... I've tried a few different ways but it always ends up cloudy..

What products have you tried?

Is there any good "how to's" about ? I've tried searching but found nothing :-(

Loadsa threads on water effects!

Einion

 

[airhead]

Is this a polyester casting resin?
To clear up a bit of frost, try mixing a small batch of resin and painting the exposed surface.
That is how I made the Gelatinous Cube 'wet'.