Super Dungeon Explore.

A

Ainnst

New member
You paint absurdly quickly, Mike. You clearly don't enjoy torturing yourself like the rest of us. Good looking minis!
 
Digganob

Digganob

New member
Curse you sir. These are so cool. Well done and now I got to go find me some of those figures. What were they called again?
 
Bloodhowl

Bloodhowl

Active member
Mike,

How are you cleaning off the mold lines? I have tried sandpaper, sanding sticks, slicing with a hobby knife, scraping with a hobby knife, and files. The knife seems to work the best, but it's taking me longer than I would like. Any tips?
 
Zab

Zab

New member
When I prepared Vandella. I had to use a knife and then smooth things out with a few watered down liquid GS washes and very very fine grit sand paper (400 or 600 grit). It was a real bear.
 
Bloodhowl

Bloodhowl

Active member
Zab said:
When I prepared Vandella. I had to use a knife and then smooth things out with a few watered down liquid GS washes and very very fine grit sand paper (400 or 600 grit). It was a real bear.
Click to expand...

I think I've been using 800 grit sandpaper, when I use sandpaper. Might need to drop it down to 400 or lower, then sand back up to 800 for final smoothing. I don't like using the knife to slice off the lines. I've taken out some decent size gouges that needed repair, even when I am being extra careful. I have the base set and two expansions to get through, so any tips to speed up the process is appreciated.
 
You must log in or register to reply here.
Back To Top
Top