Thinned Too Much

[Gussy]

Aside from needing multiple coats, would there be a problem if the paint was diluted a little too much...as in 2 parts water and 1 part paint? The color is purple.

 

[Sand Rat]

Sounds like more of a wash but with enough layers it should work

 

[Sudden]

Should\'nt be any problem. I use the sem mix sometimes when im doing finishing highlights

 

[Vanth]

Considering that mixes of 10 or 12 parts water to 1 part paint are not unheard of, I can\'t see why a 2:1 should pose a problem

 

[Dragonsreach]

Originally posted by Gussy
Aside from needing multiple coats, would there be a problem if the paint was diluted a little too much...as in 2 parts water and 1 part paint? The color is purple.

Well since that\'s a normal dilution ratio the answer is no. Thinner cots are better
What you will have to be careful of is the tendancy for diluted paints to pool so a piece of absorbent material to take some of the excess water from your brush is essential.

 

[Shawn R. L.]

What\'s your reason for wanting to thin the paint?

 

[Gussy]

I was trying to get a lighter and with a little red tint Liche Purple by mixing it with Ice Blue and Warlock Purple...and of course water.

After three coats, I think I like this consistency. It will take another two coats for solid coverage.