For the wings I drew a template for the \"bones\" then made 2 wire armatures for them. I then made a GS sheet and put the flat armatures on the GS then cut the sheet to shape. When cured I bent the wing shape then sculpt the bones and texture on one side. Leave to cure then sculpt the bones/ texture on the other side.
SCULPTING-works in progress
- Thread starter Klute
- Start date
Thanks Anders. There\'s a lot of practicing going on. The small critters are for a range from Crunch Waffle called \"Tall Tales\". Mythical stuff and folklore creatures etc. The demon guy is actually the Jersey Devil. Got a few more on the way too.
Im having fun with my entry for the Heresy competition. I think you guys will love it.
Im having fun with my entry for the Heresy competition. I think you guys will love it.
darkartminiatures
New member
Wow klute. I think you have progressed loads since the start of this thread. Nice one. 
Demon Hunter
New member
Just to keep the thread alive Here\'s something I\'ve been working on this week. Got the new BT Chapter Upgrade box, very nice amount of bits Made this BT High Marshall in Termie Armour with a plastic Termie I had lying around. I can\'t see much sculpting in the scan, but I actually filled some huge gaps that where there after replacing the normal Termie chest with a Crusader one. Some more BT bitz to pimp it all up and this is the result:
I\'m to a friend of mine(the one the Libbie is for) on Sunday for some nice wargaming and he\'s going to take some piccies off the stuff I did in the last 9 months. I haven\'t updated my gallery here on CMON all that time and it seemed I dropped about 800 ranks or so down
Here\'s something I\'ve been working on this week. Got the new BT Chapter Upgrade box, very nice amount of bits Made this BT High Marshall in Termie Armour with a plastic Termie I had lying around. I can\'t see much sculpting in the scan, but I actually filled some huge gaps that where there after replacing the normal Termie chest with a Crusader one. Some more BT bitz to pimp it all up and this is the result:
I\'m to a friend of mine(the one the Libbie is for) on Sunday for some nice wargaming and he\'s going to take some piccies off the stuff I did in the last 9 months. I haven\'t updated my gallery here on CMON all that time and it seemed I dropped about 800 ranks or so down
El Guardian
Member
decided to revive this dead post with a finished piece of a previous post
http://www.coolminiornot.com/118162
some votes would be great, thanks, hope this threat doesnt die again
http://www.coolminiornot.com/118162
some votes would be great, thanks, hope this threat doesnt die again
james sequeira
New member
looks ace raised up do you when it is released
El Guardian
Member
no unfortunatly i dont have an idea of the release date.
M
Marmoset
Guest
Hooray, 50th post, halfway to becoming a \'member\'! :bouncy:
Here is a WIP of mine, my first sculpt, a Cathayan Dragon. I know he is not very smooth... my green stuff was very old and the yellow had gone into little lumpy bits :~( I think I have posted him before, but here he is again anyway
and here are his eyes after undercoating... please bear in mind that they are only 2mm across!
Hope you like him, comments appreciated! :flip:
happy painting
~Bill
Here is a WIP of mine, my first sculpt, a Cathayan Dragon. I know he is not very smooth... my green stuff was very old and the yellow had gone into little lumpy bits :~( I think I have posted him before, but here he is again anyway
and here are his eyes after undercoating... please bear in mind that they are only 2mm across!
Hope you like him, comments appreciated! :flip:
happy painting
~Bill
freakinacage
Well-known member
superb as ever el - can\'t wait to see more from you!
i like the colours marmoset. make sure you make the edge of the eye smooth
i like the colours marmoset. make sure you make the edge of the eye smooth
El Guardian
Member
This is what i do on my free time, is just a little personal project. for some time now ive been planning to sculpt a 54 mm miniature, and this is what ive done so far, pretty sure you know what it is
the head will be rised a little, and there is a lot to do but im really happy so far, specially with the proportions and the muscles (had alittle help from a friend there)
the head will be rised a little, and there is a lot to do but im really happy so far, specially with the proportions and the muscles (had alittle help from a friend there)
abstract incendiarie
New member
El Guardian - sculpts are looking brilliant, will the 54mm one ever be cast it is showing an awful lot of potential?
AI
AI
El Guardian
Member
im making it for myself but if they ask me to do it i will do it, would live to see it casted
but as i said its not in my hands right now, as far as i can tell there is no plans to cast it yet
but as i said its not in my hands right now, as far as i can tell there is no plans to cast it yet
freakinacage
Well-known member
nice to hear that even the pro\'s need help from time to time. looks great
El Guardian
Member
New picture, not the best photo though. a lot of work has been done, and the details are atrating to build up quite fast, hope you like him
freakinacage
Well-known member
he is superb - what is he going to be?
james sequeira
New member
lol i cant work out who he is
El Guardian
Member
its going to be a secutor gladiator, from the Urban war universe, a kind of gladiator of the future XD
