GD get together mini WIP\'s

lono

New member
Grenade Launcher shots are coming on Monday. I have a whole weekend of free time so I figure I can get him done, or at least nearly done if I really go hard at it.
 

krom1415

Active member
OK I\'ve done a bit more, and I hope I have not messed it up. I thought the grey was too light and gave it a wash of black, shit it was a mistake:( I\'ve still got to finish the base with grey\'s
Any thoughts on how I can improve it would be gratfully recieved:D
PICT0012.jpg
 

Dragonsreach

Super Moderator
Staff member
Mark: I\'ve been looking at him for about 10 minutes and the only thing I would suggest is to bring up a step the hghlights on the brass of the rifle.
Then warm them up with a slight brown toning to the shadows.
Other that that it\'s looking great.:D
 

krom1415

Active member
Thanks Penguin, its the antenii I\'m having most trouble with, as its all silver, and my NMM experience with this area is zero :D
Any tips gratefully recieved???
 

Orb

procrastinator
Mark, he\'s looking fine.........I think if you did anything, it would be to add some selective thinned white reflection points in the metals........both steel and brass/gold, jjust to make them pop.

I\'ve finished the SB, and posted him here now in the gallery, and put in in the submissions thread here so stroll on over and have a look :D
 

War Griffon

New member
Mark, he is looking excellent unlike the commander which I now think I might have messed up altogether and might even have to re do all the gold NMM on his breast plate and leg grieves :( :cussing:

Unlike Rob with his Standard bearer who wanted to paint himself this Commander has been nothing but a typical high ranking Officer and has made me work every bit of the way...

In an attempt to try and get teh breast plate and thigh grieves to pop I narrowed the shadows and hightened the amount of white into the mix, trouble is now I think I went to far and I am not sure what I think of it now other than I have gone to far with it :(

The reds are nearly finished I just have to line in a few more shadow areas and the rest of the gold trim needs to be finished off.

I had a productive couple of days in work whereby I managed to get a bit of painting done as the contractors decided not to work the weekend so I have slipped off home for today and tomorrow :D

Anyway here are a couple more shots see what you think.


Vos-3.jpg



Vos-3a.jpg


Vos3b.jpg


Thoughts from everybody are appreciated
 

krom1415

Active member
Hi WarGriffon, he is certainly looking great:D a true officer.
You have maybe gone a little too white on the gold breast plate, I\'m a bit new at all this posh painting, so dont take my advice, await Orb\'s or one of the others to give you pro help.
If it was me I would do a few glazes to darken some spots down again, just leaving the high spots as they are.
I use snakebite leather/white mix, if your using this reciepie, i would maybe add some black to the scorched to get the darker bits back, then lift it back up to whats there already.
At the moment it certainly looks sharp, just a little too white, so dont go doing too much to it.
These vostroyans, when they came out I thought they looked bad, but now as I have done my one and looked in datail at all the others, I think they are really great mini\'s.
Orb\'s is absolutely superb, and Dragonsreach\'s, as will yours be, who ever gets these chaps will have a great looking troop
:D:D
 

War Griffon

New member
Thanks Mark, I have been using snakebite (not as a drink :drunk: ) though I also found a great mid tone in between the snakebite and bone mix of colours which is one of the old GW pots I have had for years called Sulphur Desert yellow the old pots are great even after ten years this one is good as new :D I might just add a bit of that to it and see what happens to take away some of the white.

Mike suggested maybe a beastial/swamp brown as it is slightly orange so we shall have to see what happens and how I feel in the morning I have a few other things I need to sort out plus it will give Rob a chance to make a suggestion or two on what maybe to try. :D
 

Thecadian

Active member
Originally posted by krom1415
OK I\'ve done a bit more, and I hope I have not messed it up. I thought the grey was too light and gave it a wash of black, shit it was a mistake:( I\'ve still got to finish the base with grey\'s
Any thoughts on how I can improve it would be gratfully recieved:D
PICT0012.jpg


maybe put some writing on the purity seal
 

krom1415

Active member
I was hoping nobody would notice that:D
Any photos of great examples ? as I have not done any before

Great idea War Griffon, with the bestial mix, I use that for bronze type armour and it works for me:D
 

War Griffon

New member
Originally posted by mistamick
Is he meant to look like he\'s got stilts.
Sorry

Of course he is meant to have stilts whilst he is being painted how else am I surposed to hold onto him without taking all the paint off again before I have finished???
 

War Griffon

New member
Originally posted by krom1415
I was hoping nobody would notice that:D
Any photos of great examples ? as I have not done any before

Great idea War Griffon, with the bestial mix, I use that for bronze type armour and it works for me:D

Mark, search for a user called Cyril and check out the Marines in his gallery, otherwise keep the paint very thin and use a very small brush :D assuming you have used white on the scroll any minor mistakes can be touched up.

It is one of the things I intend to add to the Commander as well.


EDIT: OK I will do the donkey work :D check out the bottom left picture of the montarge :D

Cyril\'s Marine
 

Thecadian

Active member
well i dont know about great example but heres my go at it.

+ a chhesy pic of the easy ish way to do it

basically do squiggly lines/or straight lines

and bobs your uncle.

help1.jpg


chgaplinfinished.jpg


maybe this is to simple but its your choice
 

Dragonsreach

Super Moderator
Staff member
While it\'s fresh in my mind here\'s a status list:

Vostroyan Commander : War Griffon Ongoing
Vostroyan Standard : Orb Complete
Vostroyan Comm Link : krom1415 Ongoing
Vostroyan Medic : Medved
Vostroyan Grenade Launcher : lono

Vostroyan Sniper 1 : green stuff
Vostroyan Sniper 2 : Tyneth

Commissar : Avelorn

Vostroyan Sergeant : Talonicus Complete
Vostroyan Radio Operator (a converted Vostroyan Trooper) : Penguin
Vostroyan Flamer : KingM
Vostroyan Lascannon Team : tidoco2222
Vostroyan Trooper : darkartminiatures
Vostroyan Trooper : Dragonsreach Complete
Vostroyan Trooper : generulpoleaxe Ongoing
Vostroyan Trooper : squig hunter
Vostroyan Trooper : Thecadian
Vostroyan Trooper : Dragon Forge Design


If anyone has any news on their figure I\'d be grateful to have some info.
 
Back To Top
Top